检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王燕[1,2] 张钦[1,2] 林福昌[1,2] 李化[1,2] Wang Yan;Zhang Qin;Lin Fuchang;Li Hua(State Key Laboratory of Advanced Electromagnetic Engineering and Technology,Huazhong University of Science and Technology,Wuhan 430074,China;Key Laboratory of Pulse Power Technology(Ministry of Education),Huazhong University of Science and Technology,Wuhan 430074 China)
机构地区:[1]华中科技大学强电磁工程与新技术国家重点实验室,武汉430074 [2]华中科技大学脉冲功率技术教育部重点实验室,武汉430074
出 处:《强激光与粒子束》2022年第5期158-164,共7页High Power Laser and Particle Beams
摘 要:针对高功率脉冲电源集成系统连续放电的需求,研制了一种用于该系统的重频水冷电感。水冷电感在系统中既调节电源的电流波形,又能起到隔离作用。该重频水冷电感耐压高、通流大、充电间隔周期6 s,可连续工作10次放电。针对连续放电的需求,通过去离子循环水对重频电感进行降温。现以单模块能量334 kJ、电感量30μH、通流100 kA为例进行设计分析,建立重频水冷电感温度场仿真模型,通过ANSYS仿真软件对该电感内部温度瞬态特性进行分析。结果表明:水冷电感通过去离子水冷却效果好,电感每次工作后温度最高达到47℃,在下一个工作点到来之前电感温度又恢复到41℃;同时该电感在没有加循环水的情况下通过了112 kA的电动力考核。试验结果与理论分析吻合较好,重频水冷电感运行稳定,从而验证了理论分析和设计的正确性。To meet the requirement of continuous discharge in the integrated system of high power pulse power supply a repeatitive frequency water-cooled inductor for the system was developed. In the system, the water-cooled inductor can not only adjust the current waveform of the power supply, but also play an isolation role. The repeatitive frequency water-cooled inductor can withstand high voltage, large current, charge interval period of 6seconds, and can work continuously for 10 times of discharge capacity. To meet the requirement of continuous discharge, deionized circulating water is used to cool the inductor. Taking the single module energy of 334 kJ,inductance of 30 μH, and current of 100 kA as an example, the design and analysis are carried out to establish the temperature field simulation model of the inductor, and analysis is made on the transient characteristics of the internal temperature of the inductor through ANSYS simulation software. The results show that the inductor is well cooled by deionized water, and the maximum temperature of the inductor reaches 47 ℃ after each operation, and the temperature of the inductor recovers to 41 ℃ before the next operation point. At the same time, the inductor passes the 112 kA electrodynamic test without circulating water. The experimental results agree well with the theoretical analysis, and the inductor runs stably, which verifies the correctness of theoretical analysis and design.
分 类 号:TM83[电气工程—高电压与绝缘技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.217.210.224