针对不同楔角和楔块材料的NXJ型耐张线夹和导线应力分布情况  

Effect of Wedge Angle and Wedge Material on Stress Distribution of NXJ Type Tension Clamp and Wire

作　　者：颜涛 李学 王云辉 陈勇 YAN Tao;LI Xue;WANG Yunhui;CHEN Yong(Infrastructure Department of Yunnan Power Grid Company Limited,Kunming 650500)

机构地区：[1]云南电网有限责任公司基建部,昆明650500

出　　处：《电气工程学报》2022年第1期251-256,共6页Journal of Electrical Engineering

基　　金：云南电网公司科技资助项目(YNKJXM20190227)。

摘　　要：楔型耐张线夹在电力系统中被广泛应用,但在实际运行中经常出现导线脱落的问题,其问题根源为楔型线夹握力不足。对NXJ型耐张线夹的结构特点与安装方式进行简单介绍,并进行有限元仿真,通过改变NXJ型耐张线夹的楔角和楔块材料来改变线夹在运行期间的力学强度,得出线夹本体和导线的应力分布云图,对比得出不同条件下线夹对导线的握力情况,为NXJ型耐张线夹的优化提出参考。Wedge-shaped tension clamps are widely used in power systems, but the problem of wire shedding often occurs in actual operation. The root cause of the problem is insufficient grip of the wedge-shaped clamp. A brief introduction to the structural characteristics and installation method of NXJ type tension clamp is elaborated, and finite element simulation is performed to change the mechanical strength of the clamp during operation by changing the wedge angle and wedge material of the NXJ tension clamp.The stress distribution cloud diagram of the clamp body and the wire is obtained, and the grip force of the clamp on the wire under different conditions is compared, which provides a reference for the optimization of the NXJ type tension clamp.

关 键 词：NXJ型耐张线夹 有限元仿真 楔角 楔块材料 

分 类 号：TM752[电气工程—电力系统及自动化]