Fracture of two three-dimensional parallel internal cracks in brittle solid under ultrasonic fracturing  

作　　者：Haijun Wang Hanzhang Li Lei Tang Xuhua Ren Qingxiang Meng Chun Zhu 

机构地区：[1]State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering,Nanjing Hydraulic Research Institute,Nanjing,210029,China [2]School of Earth Sciences and Engineering,Hohai University,Nanjing,210098,China

出　　处：《Journal of Rock Mechanics and Geotechnical Engineering》2022年第3期757-769,共13页岩石力学与岩土工程学报（英文版）

基　　金：supported by the National Natural Science Foundation of China (Grant Nos. 52104125, U1765204 and 51739008)

摘　　要：Similar to hydraulic fracturing(HF), the coalescence and fracture of cracks are induced within a rock under the action of an ultrasonic field, known as ultrasonic fracturing(UF). Investigating UF is important in both hard rock drilling and oil and gas recovery. A three-dimensional internal laser-engraved crack(3D-ILC) method was introduced to prefabricate two parallel internal cracks within the samples without any damage to the surface. The samples were subjected to UF. The mechanism of UF was elucidated by analyzing the characteristics of fracture surfaces. The crack propagation path under different ultrasonic parameters was obtained by numerical simulation based on the Paris fatigue model and compared to the experimental results of UF. The results show that the 3D-ILC method is a powerful tool for UF research.Under the action of an ultrasonic field, the fracture surface shows the characteristics of beach marks and contains powder locally, indicating that the UF mechanism includes high-cycle fatigue fracture, shear and friction, and temperature load. The two internal cracks become close under UF. The numerical result obtained by the Paris fatigue model also shows the attraction of the two cracks, consistent with the test results. The 3D-ILC method provides a new tool for the experimental study of UF. Compared to the conventional numerical methods based on the analysis of stress-strain and plastic zone, numerical simulation can be a good alternative method to obtain the crack path under UF.

关 键 词：Three-dimensional internal laser-engraved crack(3D-ILC) Interaction of cracks Ultrasonic fatigue Penny-shaped crack Fracture mechanics High-cycle fatigue 

分 类 号：P618.13[天文地球—矿床学]