Influence of alumina abrasive tool wear on ground surface characteristics and corrosion properties of K444 nickel-based superalloy  

作　　者：Min LI Jingfei YIN Linbo CHE Wenfeng DING Jiuhua XU 

机构地区：[1]National Key Laboratory of Science and Technology on Helicopter Transmission,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China

出　　处：《Chinese Journal of Aeronautics》2022年第6期339-351,共13页中国航空学报（英文版）

基　　金：financially supported by the National Natural Science Foundation of China (Nos. 51921003 and 51775275);Major Special Projects of Aero-engine and Gas Turbine (No. 2017-Ⅶ-0002-0095);National Key Laboratory of Science and Technology on Helicopter Transmission (Nanjing University of Aeronautics and Astronautics) (No. HTL-A-20G01);Interdisciplinary Innovation Fundation for Graduates, (Nanjing University of Aeronautics and Astronautics, No. KXKCXJJ202006);the Project Funded by China Postdoctoral Science Foundation (No. 2020TQ0149)

摘　　要：K444 nickel-based superalloy is an important material to manufacture the gas turbine due to its excellent mechanical properties at high temperatures and corrosion resistance.Currently,grinding is the mostly used method for the surface finish of the K444 alloy components.However,few studies worked on the effects of the abrasive tool wear on the ground surface characteristics and corrosion properties of K444 alloy.This study uses two different-type alumina abrasive tools,i.e.,white alumina(WA)and microcrystalline alumina(MA)wheels,to grind the K444 alloy.The influence of the alumina abrasive tool wear on ground surface characteristics and corrosion resistance performance are investigated.It is discovered that the MA wheel presents a slighter wheel wear and higher self-sharpening than the WA wheel.Compared to the WA wheel,the MA wheel has less material adhesion,which leads to a better surface finish.In the corrosion testing,the maximum corrosion depth is 80μm in the surface ground by the MA wheel but 100μm in the surface ground by the WA wheel,which demonstrates that the MA wheel grinding benefits the surface corrosion resistance of K444 alloy.Therefore,this study could provide a guide to selecting the abrasive tools and optimizing the grinding process of the K444 alloy.

关 键 词：Abrasive wheel wear Corrosion resistance GRINDING K444 nickel-based superalloy Microcrystalline alumina 

分 类 号：V262[航空宇航科学与技术—航空宇航制造工程]