DEM Simulations of Resistance of Particle to Intruders during Quasistatic Penetrations  

作　　者：Shaomin Liang Lu Liu Shunying Ji 

机构地区：[1]State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology,Dalian,116023,China

出　　处：《Computer Modeling in Engineering & Sciences》2021年第7期145-160,共16页工程与科学中的计算机建模（英文）

基　　金：This study was financially supported by the National Key Research and Development Program of China(Grant No.2018YFA0605902);the National Natural Science Foundation of China(Grant Nos.11572067 and 11772085).

摘　　要：Based on the discrete element method and hydrostatics theory,an improved Archimedes principle is proposed to study the rules pertaining to resistance changes during the penetration process of an intruder into the particulate materials.The results illustrate the fact that the lateral contribution to the resistance is very small,while the tangential force of the lateral resistance originates from friction effects.Conversely,the resistance of particulate materials on the intruder mainly occurs at the bottom part of the intruding object.Correspondingly,the factors that determine the resistance of the bottom part of the intruding object and the rules pertaining to resistance changes are analyzed.It is found that when the volume density and friction coefficient of the particles and the radius of the bottom surface of the cylindrical intruder are varied,the resistance–depth curve consists of a nonlinear segment and a linear region.The intersection of the two stages occurs at the same location h/˜R=0.15±0.055.The slope of the linear stage is determined by the friction coefficient of the particles.Accordingly,the relationship between the slope and the friction coefficient is quantified.Finally,it is shown that the slope is independent of the geometry of the intruder.

关 键 词：Particulate materials improved Archimedes principle quasistatic resistance discrete element method 

分 类 号：TG1[金属学及工艺—金属学]