间隙流动对集成电机泵喷推进器水动力性能影响研究  

Effect of the gap-flow model on the hydrodynamic performance of a IMP propulsor

作　　者：李俏 LI Qiao(Department of Intelligent Manufacturing,Guangdong Polytechnic College,Zhaoqing 526100,China)

机构地区：[1]广东理工学院智能制造学院,广东肇庆526100

出　　处：《舰船科学技术》2022年第8期50-55,181,共7页Ship Science and Technology

基　　金：广东省普通高校青年创新人才类项目(自然科学类)(2020KQNCX112);广东理工学院创新强校工程项目(2019GKJZK004)。

摘　　要：集成电机泵喷推进器在水下工作时,由于压差,当水流流过间隙流道时,会在间隙中产生摩擦功耗。为了更加准确地了解集成电机泵喷推进器的水动力性能,首先对轮缘摩擦扭矩的影响因素进行分析,确定不同影响因素的几何参数对轮缘摩擦扭矩的影响规律,计算结果与经验值吻合良好。基于此,分析有无间隙流动对推进器敞水性能的影响情况,进而分析在间隙流动状态下,不同间隙参数对推进器敞水性能的影响规律。结果表明,可通过减小轴向间隙等方法达到降低轮缘的摩擦扭矩,有无间隙流动时效率都随着转速的增加先减小再增大,有间隙模型时的效率总是大于无间隙模型。When the IMP propulsor works underwater, due to the pressure difference, when the water flows through the gap flow channel, frictional power consumption will be generated in the gap. In order to understand the hydrodynamic performance of IMP propulsor more accurately, this article first analyzed the influencing factors of wheel rim friction torque,and determined the influence law of geometric parameters of different influencing factors on wheel rim friction torque, calculation results and empirical values good agreement. Based on this, the influence of the presence or absence of clearance flow on the open-water performance of the propulsor was analyzed, and the influence of different clearance parameters on the open-water performance of the propulsor in the state of clearance flow was analyzed. The results show that: the friction torque of the rim can be reduced by reducing the axial clearance, etc. The efficiency of the flow with or without clearance will first decrease and then increase with the increase of the speed. The efficiency of the model with clearance is always greater than that with no clearance model.

关 键 词：集成电机泵喷推进器 间隙流动 摩擦扭矩 湍流 水动力性能 

分 类 号：U664.3[交通运输工程—船舶及航道工程]