织物在三维模拟中的悬垂性研究  

Research on the drape of fabric in 3D simulation

作　　者：冯华峰 刘晨 王刚强 张建立 FENG Huafeng;LIU Chen;WANG Gangqiang;ZHANG Jianli(Department of Textiles and Clothing,Keyi College of Zhejiang Sci-Tech University,Shangyu,Zhejiang 312369,China;Yuyao Yongjian Automatic Control Equipment Co.,Ltd.,Yuyao,Zhejiang 315400,China)

机构地区：[1]浙江理工大学科技与艺术学院纺织服装学院,浙江上虞312369 [2]余姚永坚自控设备有限公司,浙江余姚315400

出　　处：《毛纺科技》2022年第5期104-109,共6页Wool Textile Journal

基　　金：浙江理工大学科技与艺术学院项目(KY2020010);浙江省产学合作协同育人项目(21196)。

摘　　要：为了更好地进行数字化教学,选取8种不同织物作为研究对象,对面料在三维模拟中的悬垂性进行研究。首先在CLO 3D三维模拟软件中确定织物悬垂性影响因素,然后通过实验测定真实织物的悬垂系数,运用均值比较、相关分析、多元回归分析等方法统计分析,创建了1个基于三维虚拟织物悬垂系数的回归模型。研究发现虚拟织物的2个物理参数弯曲强度和织物密度对织物的悬垂性影响最为密切,同时分析得出如何依据参数值在CLO 3D中调节出各种面料接近真实的悬垂效果。将传统服装通过三维模拟展示出来,还原服装的真实感,使三维服装在数字化教学中展现出更加自然的褶皱、波浪等形态。In order to carry out digital teaching better,8 different fabrics were selected as research objects to study the drape of fabrics in 3D simulation.Firstly,the factors affecting fabric drape were determined in CLO 3D simulation software,and then the drape coefficient of real fabric was measured through experiments.A regression model based on 3D virtual fabric drape coefficient was established by means of comparison,correlation analysis,multiple regression analysis and other statistical analysis methods.The study found that the two physical parameters of virtual fabric,bending strength and fabric density,had the closest influence on fabric drape.Meanwhile,how to adjust the drape effect of various fabrics in CLO 3D was analyzed according to the parameter values.The traditional clothing fittings are displayed through three-dimensional simulation to restore the real sense of clothing,so that 3D clothing in digital teaching can show more natural forms of folds and waves.

关 键 词：织物 三维模拟 悬垂性 回归分析 

分 类 号：TS101.923[轻工技术与工程—纺织工程]