检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:朱雪莹 余延顺[1] Zhu Xueying;Yu Yanshun(Nanjing University of Science and Technology,Nanjing)
机构地区:[1]南京理工大学,南京210094
出 处:《暖通空调》2022年第4期123-127,共5页Heating Ventilating & Air Conditioning
摘 要:针对空气源热泵制热工况误除霜问题,提出了一种基于颜色传感器的空气源热泵除霜控制方法。根据颜色传感器的工作原理,进行了硬件和软件设计,并对霜层识别的可行性进行了试验验证。结果表明,随着霜层生长,输出的R(红色)、G(绿色)、B(蓝色)值逐渐增大,结霜前R、G、B值分别为61、58、56,20 min后分别为114、108、106,可有效识别换热器表面的结霜状况,对未来应用于空气源热泵除霜控制及相关换热器除霜具有潜在的价值。Aiming at the problem of false defrosting in the heating condition of air-source heat pumps,a defrosting control method of air-source heat pumps based on color sensors is proposed.According to the working principle of the color sensor,the hardware and software are designed,and the feasibility of frost layer recognition is verified by experiments.The results show that with the growth of the frost layer,the output R,G and B values gradually increase.The values of R,G and B before frosting are 61,58 and 56,respectively.After 20 minutes,the values of R,G and B are 114,108 and 106,respectively,which can effectively identify the frosting condition on the surface of the heat exchanger.It has potential value for future applications to defrosting control of air-source heat pumps and related heat exchanger defrosting.
关 键 词:空气源热泵 颜色传感器 制热工况 误除霜 除霜控制 试验验证
分 类 号:TU83[建筑科学—供热、供燃气、通风及空调工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49