基于不同气体和压力下通道型正压标准漏孔漏率的分析  

Analysis of leakage rate of channel positive pressure standard leakage hole based on different gas and pressure

作　　者：刘燚 刘贝贝 周宇仁 庄炜杰 邬昕 胡馨丹 Liu Yi;Liu Beibei;Zhou Yuren;Zhuang Weijie;Wu Xin;Hu Xindan(Shanghai Institute of Measurement and Testing Technology)

机构地区：[1]上海市计量测试技术研究院

出　　处：《上海计量测试》2022年第1期31-33,共3页Shanghai Measurement and Testing

摘　　要：依据JJF 1627-2017《皂膜流量计标准漏孔校准规范》以及正压标准漏孔校准装置,分别分析了在高纯空气、高纯氮气、高纯氦气和不同压力条件下对漏孔漏率的影响。研究结果表明,同种气体在较小的压力下,漏孔中的漏率与压力成比例关系。此外,同种气体通过漏孔的漏率会随进口压力的增大而增大,在进口端压力相同且压力较大的条件下,高纯氦气的漏率值最大,这说明气体分子的黏滞性是影响漏率大小的主要因素。Based on JJF 1627-2017 Calibration Specification for Reference Leaks by soap Film Flowmeter and positive pressure standard leakage calibration device,this paper analyzes the influence on leakage rate under the conditions of high-purity air,high-purity nitrogen,high-purity helium and different pressures.The results show that the leakage rate in the leakage hole is nonlinear related to the pressure under large pressure.In addition,the leakage rate of the same gas through the leakage hole will increase with the increase of inlet pressure.Under the condition of the same inlet pressure and high pressure,the leakage rate of high-purity helium is the largest,which shows that the viscosity of gas molecules is the main factor affecting the leakage rate.

关 键 词：不同气体 黏滞性 通道型标准漏孔 漏率 

分 类 号：TH814[机械工程—仪器科学与技术]