汽车软包电池的不同液冷因素及组合充电工况的热分析  

Thermal analysis of different liquid cooling factors and combined charging condition of automobile soft pack battery

作　　者：杨秀丰 屈翔[1] 贾秋红[1] 高成龙 谭伟[1] YANG Xiufeng;QU Xiang;JIA Qiuhong;GAO Chenglong;TAN Wei(Key Laboratory of Advanced Manufacturing Technology for Automobile Parts,Ministry of Education,Chongqing University of Technology,Chongqing 400054,China;Guangzhou Group Automotive Co.,Ltd.,Automotive Engineering Research Institute,Guangzhou,510000,China)

机构地区：[1]重庆理工大学汽车零部件先进制造技术教育部重点实验室,重庆400054 [2]广州集团汽车股份有限公司汽车工程研究院,广州510000

出　　处：《重庆理工大学学报（自然科学）》2022年第5期91-98,共8页Journal of Chongqing University of Technology：Natural Science

基　　金：重庆市科技局技术创新项目(cstc2019jscx-fxydX0020);国家电网有限公司科技项目(5418-202040248A-0-0-00)。

摘　　要：以某款软包电池为研究对象,建立单体电池传热模型并进行电池单体温升仿真及试验,验证了生热模型的正确性,并采用液冷管的结构,对电池组进行2 C放电仿真分析。仿真结果表明:电池的最高温度为26.96℃,最大温差为2.1℃。通过研究不同冷却液对电池散热的影响,得出50%乙二醇水溶液的冷却效果最好。另外,研究了不同流量对电池均温性的影响。设计15种不同充电倍率组合的充电方案,并分3个阶段进行,确定了基于最大温差和充电时间的最佳快充、中充和慢充模式。Taking a certain type of soft pack battery as the research object,the heat transfer model of the cell is established and the temperature rising simulation and experiment of the cell are carried out to verify the correctness of the model.Using the structure of the liquid cooling tube,the battery pack is subjected to 2C discharging analysis.The simulation results show that the maximum temperature of the battery is 26.96℃,and the maximum temperature difference is 2.1℃.The influence of different coolants on the heat dissipation of the battery is researched,it is concluded that 50%ethylene glycol aqueous solution has the best effect.Furthermore,the influence of different flow rates on battery temperature uniformity is studied.Through designing fifteen kinds of combined charging rate schemes and proceeding in three stages,the best charging mode of fast charge,medium charge and slow charge are determined based on the maximum temperature difference and charging time.

关 键 词：软包电池 冷却管 组合充电工况 散热 

分 类 号：TM911.4[电气工程—电力电子与电力传动]