恒热流边界条件下降膜温度场及其对红外探测距离的影响  

Temperature Field of a Falling Film with Constant Heat Flux Boundary Conditions and Its Influence on the Infrared Detection Range

作　　者：李东臻 杜永成[2] 彭友顺[2] 杨立[2] LI Dongzhen;DU Yongcheng;PENG Youshun;YANG Li(College of Power Engineering,Naval University of Engineering,Wuhan 430033,China;Teaching and Research Support Center,Naval University of Engineering,Wuhan 430033,China)

机构地区：[1]海军工程大学教研保障中心,湖北武汉430033 [2]海军工程大学动力工程学院,湖北武汉430033

出　　处：《红外技术》2022年第6期604-608,共5页Infrared Technology

基　　金：国家自然科学基金(11504426)。

摘　　要：深入分析了利用恒热流边界条件下下降液膜(降膜)技术对军事目标垂直进行红外抑制的方法。建立了层流降膜的流动与传热模型,采用能量守恒法,忽略液膜入口段效应,得到了降膜表面的温度分布,简化了求解过程。通过与不同研究者结果做对比,验证了能量守恒法对于评估降膜在充分发展段换热过程的有效性。计算了探测器对采用液膜红外抑制技术后目标的识别距离,结果表明:增大液膜流动的流量、合理控制液膜入口温度可增强对特定目标的红外抑制效果。本人的研究方法和结论对军事目标的红外抑制领域具有中重要的参考意义。A falling liquid film(FLM)method for suppressing the vertical infrared of military targets under constant heat flux boundary conditions is analyzed in detail.A flow and heat transfer model of a laminar falling film is established.The temperature distribution on the falling film surface is obtained using the energy conservation method and omitting the liquid film inlet effect,which simplifies the solution process.By comparing the results of different studies,the effectiveness of the energy conservation method for evaluating the heat transfer process of a falling film in a fully developed section is verified.The recognition distance of the detector to the target is calculated using liquid film infrared suppression technology.The results show that increasing the flow rate and sufficiently controlling the inlet temperature of the liquid film enhances the infrared suppression effect on a specific target.The research methods and conclusions of this study have important applications in providing a point of reference for infrared suppression of military targets.

关 键 词：下降液膜 温度分布 恒热流边界条件 

分 类 号：TN215[电子电信—物理电子学]