纳米ZnO增强树脂基摩擦材料的制备和性能研究  

Preparation and property of nano-ZnO reinforced resin-based friction material

作　　者：王晓芳[1] 王劲松 魏愈明 Wang Xiaofang;Wang Jinsong;Wei Yuming(School of Chemistry&Chemical Engineering,Xianyang Normal University,Xianyang 712000;China Building Materials Inspection&Certification Group Xianyang Co.,Ltd.,Xianyang 712000)

机构地区：[1]咸阳师范学院化学与化工学院,咸阳712000 [2]中国建材检验认证集团咸阳有限公司,咸阳712000

出　　处：《化工新型材料》2022年第5期176-179,共4页New Chemical Materials

基　　金：咸阳市科学研究计划项目(2017k02-18);咸阳师范学院“青蓝人才”培养计划项目(XSYQL201804)。

摘　　要：采用热压成型工艺制备纳米ZnO(质量分数为0~6%)增强的树脂基摩擦材料,利用定速摩擦试验机、洛氏硬度仪和冲击强度试验机对样品进行性能表征。摩擦磨损试验结果表明:纳米ZnO不仅具有增大摩擦系数、稳定摩擦系数的作用,还具有降低磨损率及改善磨损率波动性的作用。当纳米ZnO含量为5%,摩擦性能稳定系数高达91.2%,平均摩擦系数0.45,平均磨损率0.28×10^(-7)cm^(3)/(N·m)。洛氏硬度和冲击强度试验结果表明,适量纳米ZnO添加可获得轻质、质地均匀及抗冲击性能优异的新型树脂基摩擦材料。Nano-ZnO(mass percent 0~6%)powder reinforced resin-based friction materials were prepared via hot pressing process.The samples were characterized by the constant speed friction tester,rockwell hardness tester and impact strength tester for the purpose of studying the friction and wear properties.Friction and wear test results showed that nano-ZnO particles can not only increase the friction coefficient and stabilized the friction coefficient,but also reduced the wear rate and improved the fluctuation of wear rate.When the content of nano-ZnO powder was 5%,the friction stability coefficient reached 91.2%the average friction factors was 0.45,and the average wear rate was 0.28×10^(-7)cm^(3)/(N·m).The results of rockwell hardness and impact strength tests displayed that a new type of resin-based friction material with light weight,homogeneous product and excellent impact resistance can be obtained by adding appropriate amount of nano-ZnO powder.

关 键 词：纳米氧化锌 树脂基摩擦材料 摩擦磨损 磨损机制 

分 类 号：TB332[一般工业技术—材料科学与工程]