L80-13Cr油井管的研制及耐腐蚀性能研究  

R&D of L80-13Cr Oil Well Pipe and Study on its Corrosion-resistance

作　　者：宋江波[1] 米永峰[1] 姜海龙[1] 姚晓乐[1] 刘玉荣[1] 郭智韬[1] 张学颖[1] SONG Jiangbo;MI Yongfeng;JIANG Hailong;YAO Xiaole;LIU Yurong;GUO Zhitao;ZHANG Xueying(Inner Mongolia Baogang Ganglian Co.,Ltd.,Baotou 014010,China)

机构地区：[1]内蒙古包钢钢联股份有限公司,内蒙古包头014010

出　　处：《钢管》2022年第1期44-47,共4页Steel Pipe

摘　　要：分析了L80-13Cr油井管的化学成分和技术条件要求,阐述了L80-13Cr油井管的轧制工艺,研究了L80-13Cr油井管的耐CO_(2)腐蚀性能.研究结果表明,L80-13Cr油井管热处理后的性能满足使用要求,且韧性较高;在相同腐蚀条件下,L80-13Cr在气相中的腐蚀速率约为N80Q的1/30,在液相中的腐蚀速率约为N80Q的1/300,仅发生轻微腐蚀,耐蚀性较好.Analyzed in the essay are the chemical composition of and the technical requirements for the L80-13Cr oil well pipe.Also elaborated is the rolling process for the oil well pipe.Moreover the corrosion-resistance of the said pipe is studied.It is identified via the analysis and the study that the L80-13Cr oil well pipe as heat treated has all of its properties up to applicable requirements,and has high toughness;given the corrosive conditions are the same,the gas phase corrosion rate and the liquid phase corrosion rate of the L80-13Cr pipe are separately 1/30 and 1/300 of that of the N80Q oil well pipe,showing slight corrosion,which means good corrosion-resistance.

关 键 词：油井管 L80-13Cr 耐CO_(2)腐蚀 力学性能 

分 类 号：TE931.2[石油与天然气工程—石油机械设备]