检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周林[1] 易强[1] 秦梅[1] 周小军[1] 叶一麟[1]
出 处:《重庆大学学报(自然科学版)》2002年第10期9-12,6,共5页Journal of Chongqing University
基 金:重庆大学高电压与电工新技术教育部重点实验室资助
摘 要:ip-iq 法能准确、实时地检测不对称三相系统中的有害电流 ,被广泛应用于三相电力有源滤波器。目前 ,在检测不对称三相四线系统的有害电流时 ,均事先剔除零序电流 ,然后再采用ip-iq 法。通过理论分析证明 ,ip-iq 法经过 3 2变换后iα、iβ 中都不含零序电流分量 ,并且基波正序分量不会受到影响 ,因此含有 3 2变换的p -q法、d -q法、ip-iq 法都不会受到零序电流的影响 ,所以这些检测方法都不用先剔除零序电流而直接用于不对称三相四线系统有害电流检测。理论和仿真结果表明这种方法能正确检测出基波零序、负序及谐波分量 ,从而改变了长期以来认为ip-iq 不能直接用于三相四线系统的观点。Because i p-i q detecting method can detect harmful currents accurately and real-timely under three phase four wire unsymmetrical system, it is widely used in active power filters. At present, detecting harmful currents under three phase four wire unsymmetrical system we should subtract zero sequence current before adopt i p-i q detecting method. It is proved that for the i p-i q detecting method, there is no zero sequence current in i α and i β and the positive sequence current doesn't be affected after 3/2 transformation, so p-q?d-q and i p-i q detecting methods that include 3/2 transformation can be directly used to the three phase four wire unsymmetrical system for the harmful currents detecting and need not subtract zero sequence current in advance. The results of theoretical analysis and simulation verify that this method can correctly detect fundamental zero, negative sequence and harmonic currents, which changes former viewpoint that i p-i q detecting method can not directly be used to three phase four wire unsymmetrical system.
关 键 词:不对称三相四线制系统 检测方法 电力系统 零库电流 电网谐波 瞬时无功功率 有害电流检测
分 类 号:TM861[电气工程—高电压与绝缘技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.142.43.53