检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈柱 邹远文[1] 黄忠兵[1] 尹光福[1] CHEN Zhu;ZOU Yuanwen;HUANG Zhongbing;YIN Guangfu(College of Biomedical Engineering,Sichuan University,Chengdu 610065,China)
出 处:《实验科学与技术》2022年第3期11-14,共4页Experiment Science and Technology
基 金:科技部国家重点研发计划(2018YFC1105700);中央高校基本科研业务费专项资金(2021年)。
摘 要:对生物组织进行电刺激的过程中,确保刺激电极之间的阻抗处于刺激器的负载范围之内,是保障刺激效果的关键条件之一。该文采用STM32单片机与AD5933阻抗测量芯片构成阻抗检测装置,并在琼脂糖凝胶与3D打印模具模拟的生物组织上进行电刺激和阻抗测试。实验结果表明,电极安放位置和电极位置的变动,对电极间阻抗影响大,对于长时间、电极位置易动的电刺激实验而言,监测电极间的阻抗是非常必要的。In the process of electrical stimulation of biological tissue,the crucial point is that the bioimpedance between the stimulation electrodes are within the load range of the stimulator.In this paper,the STM32 system and AD5933 impedance measurement chip are used to form an bioimpedance detection device,and electrical stimulation and impedance testing are carried out on the biological tissue simulated by agarose gel and 3D printing mold.The experimental results show that the change of electrode position has a great influence on the bioimpedance between electrodes,so that it is quite necessary to monitor the bioimpedance between electrodes for long-term electrical stimulation experiments where the electrode position is easy to move.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15