地震作用下控制棒落棒历程分析及试验研究  

Analysis and Experimental Study on Control Rod Dropping under Seismic Conditions

作　　者：张丹[1] 黄文慧[1] 宿杰熙 魏泳涛[2] 杜建勇[1] 孙磊[1] 李朋洲[1] Zhang Dan;Huang Wenhui;Su Jiexi;Wei Yongtao;Du Jianyong;Sun Lei;Li Pengzhou(Nuclear Power Institute of China,Chengdu,610213,China;College of Architecture and Environment,Sichuan University,Chengdu,610065,China)

机构地区：[1]中国核动力研究设计院,成都610213 [2]四川大学建筑与环境学院,成都610065

出　　处：《核动力工程》2022年第S01期152-156,共5页Nuclear Power Engineering

摘　　要：为研究地震作用下的控制棒落棒历程,基于惯性阻力计算方法、粘性阻力计算方法及碰撞接触算法,以第三代核电先进型研发项目某堆型控制棒驱动线为背景,进行了地震载荷下的落棒历程计算。在多点激励试验装置上对该堆型驱动线1∶1样机进行地震试验,采用多频波法,在驱动线与反应堆的多处关联点施加地震载荷,包括运行基准地震(OBE)试验和安全停堆地震(SSE)试验。研究结果表明,各工况下落棒时间、落棒位移、速度和加速度时程的计算曲线与试验曲线符合较好。因此,本研究建立的研究方法能够为核电厂安全分析提供必要的分析方法。In order to study control rod dropping history under seismic conditions,based on the inertia resistance calculation method,viscous resistance calculation method and collision contact algorithm,the rod dropping history under seismic loads is calculated under the background of a reactor control rod drive line of the third generation nuclear power advanced R&D project.The seismic test of the 1:1 prototype of the reactor drive line is carried out on the multi-point excitation tester.The multi-frequency wave method is used to apply seismic loads at several related points between the drive line and the reactor,including operating basis earthquake(OBE)test and safe shutdown earthquake(SSE)test.The results show that the calculation curves of rod dropping time,rod displacement,velocity and acceleration are in good agreement with the test curves.Therefore,the research methods established in this study can provide necessary analysis methods for the safety analysis of nuclear power plants.

关 键 词：控制棒驱动线 地震载荷 碰撞接触 地震试验 

分 类 号：TL334[核科学技术—核技术及应用]