检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王颖 葛航奇 李政达 苏全锋 WANG Ying;GE Hangqi;LI Zhengda;SU Quanfeng
机构地区:[1]青岛地铁集团有限公司运营分公司车辆部,山东青岛266031 [2]中车青岛四方车辆研究所有限公司,山东青岛266031
出 处:《铁道技术监督》2022年第6期30-33,共4页Railway Quality Control
摘 要:针对青岛地铁11号线列车通过折返线断电区时,电源中断导致的过压故障,通过检测支撑电容电压变化斜率加快正线断电区判断,以提高逆变器封锁脉冲信号、断开主接触器的速度为手段,有效解决列车进入断电区产生的过压故障。仿真分析、模拟试验和正线试验结果表明,采用电压变化斜率检测后,可有效解决列车经过断电区时出现的过压故障,并且满足青岛地铁11号线列车在各折返线断电区保护需求。In view of the overvoltage fault caused by power interruption when trains pass through the outage area of the turn line on Qingdao Metro Line 11, it is possible to accelerate to judge the outage area of the main line by detecting the supporting capacitor voltage variation slope, thus to effectively solve the overvoltage fault caused when a train enters the outage area, by improving the inverter blocking impulse signal and the speed of disconnecting the main contactor. The results of simulation analysis, simulation test and main line test show that by means of voltage variation slope detection, it is possible to effectively solve the overvoltage fault caused when a train enters the outage area, and meet the protection demand in each turn line outage area on Qingdao Metro Line 11.
关 键 词:地铁动车组 断电区 辅助电源系统 过电压保护 电压变化斜率
分 类 号:U231.8[交通运输工程—道路与铁道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.148.232.123