检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:谢龙 赵野 薛奇 张豫川[2] 王恒涛 姚永国 XIE Long;ZHAO Ye;XUE Qi;ZHANG Yuchuan;WANG Hengtao;YAO Yongguo(Datang Dingbian Wind Power Generation Co.,Ltd.,Yulin 719000,China;Department of Civil Engineering,Lanzhou University,Lanzhou 730000,China)
机构地区:[1]大唐定边风力发电有限责任公司,榆林719000 [2]兰州大学土木工程系,兰州730000
出 处:《建筑结构》2022年第14期141-145,共5页Building Structure
摘 要:为探究黄土湿陷性对风电基桩水平承载特性的影响,在陕西省定边县某黄土场地设置3根试桩进行水平载荷试验,其中1根桩周土保持天然状态,2根桩周土在加载前已经浸水饱和且湿陷稳定。分析了各级水平荷载作用下两类试桩桩顶水平位移、桩身弯矩及其分布范围、水平抗力系数的比例系数m值的差异。试验结果表明:桩周土饱和湿陷明显增大了桩的水平位移,随着水平荷载增加这种现象更为显著;桩周土饱和湿陷时的桩身弯矩大小及其分布范围均比桩周土天然状态时大;幂函数能够较好地反映不同桩顶水平位移与m值之间关系,可以通过建立幂函数以获取m值及其相应单桩在地面处水平位移的对应关系。In order to explore the effect of loess collapsibility on the horizontal bearing characteristics of wind power foundation piles,three test piles were set up in a loess site in Dingbian County,Shaanxi Province for horizontal load tests.Among them,the surrounding soil of 1 pile remains in its natural state,and the surrounding soil of 2 piles has been saturated with water and has stable collapsibility before loading.The differences of the horizontal displacement of the pile top,the bending moment of the pile body and its distribution range,and the scaling factor for horizontal resistance factor m value of the two types of test piles under the action of horizontal loads at all levels were analyzed.The test results show that the saturated collapsibility of the soil around the pile significantly increases the horizontal displacement of the pile,and this phenomenon is more significant with the increase of the horizontal load.The magnitude and distribution range of the bending moment of the pile body when the soil around the pile is saturated and collapsible are larger than those when the soil around the pile is in the natural state.The power function can better reflect the relationship between the horizontal displacement of pile tops and the m value,and the corresponding relationship between the m value and the horizontal displacement of the corresponding single pile on the ground can be obtained by establishing a power function.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3