纵梁前端加强板成形仿真及缺陷处理  

Forming Simulation and Defect Treatment of Front end Stiffening Plate of Longitudinal Beam

作　　者：高飞 张晔 王帆 Gao Fei;Zhang Ye;Wang Fan(Shaanxi Heavy Duty Automobile Co.,Ltd.,Xi'an,Shanxi 710200,CHN)

机构地区：[1]陕西重型汽车有限公司,陕西西安710200

出　　处：《模具制造》2022年第7期9-12,共4页Die & Mould Manufacture

摘　　要：针对某车型纵梁前端加强板的制件特点,提出拉伸成形工艺设计思路及方法,介绍拉伸压料面、工艺补充设计过程。拉伸、修边、翻边及回弹进行全工序仿真,并对仿真存在的开裂缺陷,提出运用储料包、破料刀、增大拔模角3种解决方案。依据制件特性及成形模拟,优选破料刀初始刺破位置,成功的解决了开裂缺陷。实际验证中获得了良好的成形质量,冲压生产过程稳定。According to the characteristics of the front end strengthening plate of car-type longitudinal beam,the idea and method of drawing forming process design are put forward.The whole process of drawing,trimming,flanging and springback is simulated,and three solutions are put forward to solve the cracking defect.According the forming simulation,the initial piercing position of the cutter is optimized,and the cracking defect is solved successfully.Good forming quality and stable stamping process have been obtained in the practical verification.

关 键 词：拉伸压料面 工艺补充 储料包 破料刀 全工序仿真 

分 类 号：TG385.2[金属学及工艺—金属压力加工]