检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:朱乾科 郭璐[1,2] 陈哲 朱紫藤 张克维[1,2] 姜勇 ZHU Qianke;GUO Lu;CHEN Zhe;ZHU Ziteng;ZHANG Kewei;JIANG Yong(School of Materials Science and Engineering, Taiyuan University of Science and Technology,Taiyuan 030024, China;Shanxi Province Key Laboratory of Magnetic and Electric Functional Materials and Their Applications,Taiyuan University of Science and Technology, Taiyuan 030024, China;School of Electrical and Electronic Engineering, Tiangong University, Tianjin 300387, China)
机构地区:[1]太原科技大学材料科学与工程学院,太原030024 [2]太原科技大学磁电功能材料及应用山西省重点实验室,太原030024 [3]天津工业学院电气与电子工程学院,天津300384
出 处:《功能材料》2022年第6期6171-6176,共6页Journal of Functional Materials
基 金:山西省回国留学人员科研教研项目(HGKY2019083);太原科技大学博士启动金项目(20202034);山西省高等学校科技创新项目(2021L293);山西省基础研究计划(青年项目)(202103021223292)。
摘 要:类金属元素是改善Fe基非晶纳米晶合金非晶形成能力和软磁性能的重要添加剂。用单辊甩带法制备了Fe_(73.5)Si_(13.5)Nb_(3)Cu_(1)B_(9-x)P_(x)(x=0,3%,6%,9%)(原子分数)合金带材,从各元素间磁相互作用出发探索了P替换B对合金组织结构和软磁性能的影响。实验结果表明,P添加可有效提高合金的初晶相晶化温度以及合金的非晶形成能力;但是二次晶化相的析出温度降低,弱化了其热稳定性。当P含量为3%(原子分数)时,合金有较宽的退火温度窗口,且可有效细化初晶相晶粒尺寸,并在525℃退火后表现出最佳软磁性能,此时合金晶粒尺寸为9 nm,矫顽力为0.21 A/m,同时有效磁导率高于x=0合金。但是由于P的添加,残余非晶相中Fe的磁矩降低,导致合金的饱和磁感应强度降低。By alloying metalloid element,the amorphous forming ability and soft magnetic properties could be improved for the Fe based amorphous and nanocrystalline alloys.In this paper,Fe_(73.5)Si_(13.5)Nb_(3)Cu_(1)B_(9-x)P_(x)(x=0,3 at%,6 at%,9 at%)ribbons were fabricated using the melt spinning technique,and the effect of substitution of B by P on the microstructure and soft magnetic properties have been studied based on the magnetic interaction between elements.It is found that,P addition improves the onset temperature of the primary crystallization and thus the glass forming ability,but reduces the onset temperature of the secondary crystallization and thus its thermal stability.The 3 at%P addition is beneficial for the precipitation ofα-Fe and the grain size refinement.After annealed at 525℃,the optimal soft magnetic properties are obtained in x=3 at%alloy,meanwhile,the grain size is 9 nm,the coercivity is 0.21 A/m and the effective permeability is higher than that of x=0 alloy.However,P addition decreases the magnetic moment of Fe in the residual amorphous phase and thus the saturation magnetization.
分 类 号:TM271[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.117.241.170