检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨叶礼 艾学忠[1] 袁天奇 陈思宇 YANG Yeli;AI Xuezhong;YUAN Tianqi;CHEN Siyu(School of Information and Control Engineering,Jilin Institute of Chemical Technology,Jilin 132022,China;Northeast Electric Research Institute Kaiyuan Technology Co.,LTD,Jilin 132022,China)
机构地区:[1]吉林化工学院信息与控制工程学院,吉林吉林132022 [2]吉林化工学院 [3]东北电院开元科技有限公司,吉林吉林132013
出 处:《吉林化工学院学报》2022年第3期51-58,共8页Journal of Jilin Institute of Chemical Technology
基 金:吉林省科技发展计划资助项目(20190302063GX)。
摘 要:为了研究半桥变换器中开关管驱动电路、功率变压器、输出滤波电感等参数对工作状态和技术指标的影响,基于电源仿真软件Saber建立了半桥变换器开环电路模型.给出了半桥变换器中功率变压器和输出滤波电感等关键参数的计算方法.采用分段线性分析法、小纹波近似分析法和伏-秒平衡条件对半桥变换器进行稳态分析,推导了输出滤波电感在连续导通模式下(CCM)和不连续导通模式下(DCM)输出、输入函数关系式.分析了半桥变换器CCM工作模式的输出电感、负载电阻和占空比的临界值计算方法.对所建的半桥变换器开环模型进行仿真,仿真结果验证了理论推导的正确性,据此给出了提高半桥变换器稳态性能和工作效率的参数设计方法,为半桥变换器设计提供了理论依据.In order to study the influence of switching tube drive circuit,power transformer,output filter inductor and other parameters on the working state and technical indicators of half-bridge converter,an open-loop circuit model of half-bridge converter was established based on power simulation software Saber.The calculation method of key parameters such as power transformer and output filter inductor was given in half-bridge converter.The steady state of the half-bridge converter was analyzed by piecewise linear analysis,small ripple approximation analysis and volt-second equilibrium condition,and the output and input functions of the output filter inductor under continuous conduction mode(CCM)and discontinuous conduction mode(DCM)were derived.The critical values of output inductance,load resistance and duty cycle of CCM half-bridge converter were analyzed.The open-loop model of the half-bridge converter was simulated,and the simulation results verify the correctness of the theoretical derivation.Based on this,the parameter design method to improve the steady-state performance and working efficiency of the half-bridge converter was given,which provides a theoretical basis for the design of the half-bridge converter.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.148.194.168