高效率镁合金轮毂压铸件大批量化生产工艺研究  

Study on Process for Mass Production of High Efficiency Magnesium Alloy Hub Die Castings

作　　者：张占领[1] 张艳琴 郭怀宫 ZHANG Zhan-ling;ZHANG Yan-qin;GUO Huai-gong(School of Mechanical Engineering,University for Science&Technology Zhengzhou,Zhengzhou 450064,Henan,China;College of Computer and Artificial Intelligence,Zhengzhou University of Economics and Business,Zhengzhou 451191,Henan,China;Beijing Jinhui International Investment Co.,Ltd.,Beijing 100120,China)

机构地区：[1]郑州科技学院机械工程学院,河南郑州450064 [2]郑州经贸学院计算机与人工智能学院,河南郑州451191 [3]北京金辉国际投资有限公司,北京100120

出　　处：《铸造》2022年第6期694-697,共4页Foundry

基　　金：国家自然科学基金资助项目(11502120);河南省高等高校重点科研资助项目(22B520033)。

摘　　要：以AM60B镁合金轮毂为例,研究了压射速度、铸型温度和浇注温度对压铸件缺陷的影响。通过计算由虚拟实验得到的缺陷体积的信噪比,求解了不同因素在不同水平下的信噪比的均值和极差,进而获得优化的压铸工艺。经大批量化生产优化,得出的最优压铸工艺参数为:压射速度为0.9 m/s,铸型温度为260℃,浇注温度为680℃。Taking AM60B magnesium alloy hub as an example,the effects of injection speed,mold temperature and pouring temperature on die casting defects were studied.By calculating the signal-to-noise ratio of defect volume obtained by virtual experiment,the mean and range of signal-to-noise ratio of different factors at different levels were solved,and then the optimal die-casting process was obtained.Through the optimization of mass production trial production,the optimal die-casting process parameters are as follows:the injection speed is 0.9 m/s,the mold temperature is 260℃,and the pouring temperature is 680℃.The produced die-casting parts had the best quality,the fastest and the best stability.At the same time,it is found that the mold temperature was the most important factor affecting the quality stability of the die-casting parts,the filling speed was the second,and the pouring temperature had the least influence on it.Increasing the transition fillet of the mold can greatly avoid cracks.

关 键 词：高效率 AM60B 压铸件 大批量 生产工艺 

分 类 号：TG249.2[金属学及工艺—铸造]