二氧化碳激光钻孔底部玻纤残留的分析与改善  

Analysis and improvement of the residual glass fiber at the bottom of CO_(2)laser drilling

作　　者：黄水权 许校彬 邵勇 陈金星 Huang Shuiquan;Xu Xiaobin;Shao Yong;Chen Jinxing(Glorysky Electronic Technology Co.Ltd Guangdong,Huizhou 516369)

机构地区：[1]特创电子科技股份有限公司,广东惠州516369

出　　处：《印制电路信息》2022年第6期33-37,共5页Printed Circuit Information

摘　　要：在HDI板二氧化碳激光钻孔机生产过程中,孔底部侧壁难免会出现不同程度的玻纤残留。文章通过对二氧化碳激光钻孔机的设备改造升级,将最初的高斯分布的波形变换为扁平式的波形彻底改善激光钻孔的盲孔加工效果,以保证微盲孔的小型化和电镀后的质量需求。In the production process of the HDI boards by carbon dioxide laser drilling machine,it is inevitable that there will be varying degrees of glass fiber residue on the side wall at the bottom of the hole.The article transforms the original Gaussian distribution waveform into a flat waveform by upgrading the equipment of the carbon dioxide laser drilling machine to completely improve the blind hole processing effect of laser drilling,so as to ensure the miniaturization of the micro blind hole and the quality after electroplating need.

关 键 词：激光钻孔 玻璃纤维 高斯波形 光束成型器 高密度印制板 

分 类 号：TN41[电子电信—微电子学与固体电子学]