基于等效特征应变原理的复合材料有效模量细观力学分析  

Micro-mechanical Analysis of Effective Moduli of Composite Materials Based on the Principle of Equivalent Eigenstrain

作　　者：黄敏杰 马利锋 尚福林[1] Minjie Huang;Lifeng Ma;Fulin Shang(State Key Laboratory for Strength and Vibration of Mechanical Structures,Xi'an Jiaotong University,Xi'an,710049)

机构地区：[1]西安交通大学航天航空学院,机械结构强度与振动国家重点实验室,西安710049

出　　处：《固体力学学报》2022年第3期271-283,共13页Chinese Journal of Solid Mechanics

基　　金：国家自然科学基金项目(12072248)资助。

摘　　要：基于等效特征应变原理,提出了一种新的复合材料有效模量细观力学分析方法.首先,在等效特征应变原理基础上提出平均等效特征应变原理,它可用于解决有限体下任意形状(无论是凸或凹形)的单个夹杂或多个夹杂的弹性变形问题.其次,将平均等效特征应变原理与细观力学直接均匀法相结合,来分析确定复合材料的有效模量.最后利用复合材料纤维与基体的力学性能参数及纤维的体分比,借助MATLAB编程方法,预测其有效模量.通过将理论预测值与已有的的试验值、其它理论预测值进行对比,验证了新分析方法的合理性和分析精度.One of the main objectives of micro-mechanics is to predict the effective moduli of composites.Most micro-mechanics models are based on Eshelby’s equivalent inclusion method under the hypothesis of ellipsoidal inclusion.Therefore,appropriate theoretical treatment for non-ellipsoidal inclusions in inhomogeneous media is still needed.In this work,we proposed a principle of averaged equivalent eigenstrain,and developed a new analytical micro-mechanics method for determining the effective elastic moduli of composites.By introducing the concept of averaged eigenstrain,the average stress and average strain in the matrix and inclusions of the representative volume element were analyzed.The principle of averaged equivalent eigenstrain was thus developed based on the principle of equivalent eigenstrain.Identical to the principle of equivalent eigenstrain which was built on the corner-stone of principle of virtual work,this new principle is also applicable to the inclusions with arbitrary shapes(either convex or concave),and multiple inclusions within a solid of finite volume.Then,focusing on the long-fiber-reinforced two-phase composites,we obtained the analytical relations between the average stresses and average strains in the matrix and fibers.The averaged equivalent eigenstrain was thus combined with the direct homogenization method of micro-mechanics to determine the effective elastic moduli of two-phase composites,by selecting different deformation models and the corresponding boundary conditions.Finally,the effective moduli of composites were predicted using the mechanical properties of fiber and matrix constituents as well as the volume fraction of fibers,through a MATLAB program.The engineering constants such as tensile moduli,shear moduli and Poisson’s ratios of nine types of commonly-used composites were discussed in detail.After comparing the predicted values with the experimental results and the predictions from other theoretical models,it was found that the averaged relative errors of the new approach we

关 键 词：复合材料 等效特征应变原理 细观力学 有效模量 

分 类 号：TB332[一般工业技术—材料科学与工程]