Comparison of edge cracking and tensile cracking in in-situ deformation at 150℃of Mg-2Zn-1.5Mn alloy sheet  

作　　者：Qiang Liu Jiangfeng Song Yuanding Huang Bin Jiang Biquan Xiao Fusheng Pan 

机构地区：[1]National Engineering Research Center for Magnesium Alloys,Chongqing University,Chongqing 400044,China [2]MagIC-Magnesium innovation Centre,Helmholtz-Zentrum Geesthacht,Max-Planck-Str.1,21502 Geesthacht,Germany

出　　处：《Journal of Materials Science & Technology》2022年第17期24-35,共12页材料科学技术（英文版）

基　　金：financially supported by the National Natural Science Foundation of China(No.52071036,U2037601);the Fundamental Research Funds for the Central Universities Project(2020CDJQY-A002,2021CDJCGJ009)。

摘　　要：The Mg-2Zn-1.5Mn alloy(ZM21)sheets were hot-rolled in a single pass at 150℃with different reductions through on-line heating rolling.Microstructures and edge cracking behavior of the rolled sheets were investigated.The in-situ tensile tests at 150℃were also carried out,the crack initiation and propagation were compared with the edge cracking behavior of ZM21 sheets prepared by on-line heating rolling.The results reveal that the edge cracks are most likely to originate in the rolling direction and normal direction(RD-ND)plane due to the secondary tensile stress along RD.Edge cracking becomes more severe with an increasing reduction.The edge cracks mainly initiate and propagate in the fine recrystallized grain areas and the junction of recrystallized grains and sub-grains with hard orientation.The in-situ tensile test indicates that micro-cracks mainly initiate at the triple junction of grain boundaries where grains have hard orientation with low basal Schmid factor(SF).Meanwhile,those cracks are more likely to propagate along the grain boundaries with maximum difference in basal Schmid factor.Besides,the crack initiation and propagation during the in-situ tensile deformation at 150℃are found not to be associated with the recrystallization.

关 键 词：ZM21 Mg alloy On-line heating rolling In-situ tensile test Edge crack 

分 类 号：TG146.22[一般工业技术—材料科学与工程]