检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:闵凡奇 吕桃林 付诗意[2,3] 张立恒 党国举 晏莉琴 解晶莹 高云智[1] MIN Fanqi;LV Taolin;FU Shiyi;ZHANG Liheng;DANG Guoju;YAN Liqin;XIE Jingying;GAO Yunzhi(School of Chemistry and Chemical Engineering,Harbin Institute of Technology,Harbin 150001,Heilongjiang,China;Shanghai Engineering Center for Power and Energy Storage Systems;State Key Laboratory of Space Power-Sources Technology,Shanghai Institute of Space Power-Sources,Shanghai 200245,China;Shanghai Power&Energy Storage Battery System Engineering Technology Co.,Ltd.,Shanghai 200241,China;School of Chemistry and Chemical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China)
机构地区:[1]哈尔滨工业大学化工与化学学院,黑龙江哈尔滨150001 [2]上海动力与储能电池系统工程与研究中心 [3]上海空间电源研究所空间电源技术国家重点实验室,上海200245 [4]上海动力储能系统工程技术有限公司,上海200241 [5]上海交通大学化学化工学院,上海200240
出 处:《储能科学与技术》2022年第8期2629-2636,共8页Energy Storage Science and Technology
基 金:上海市青年科技启明星计划(21QB1401400);上海市优秀技术带头人计划(20XD1430800);上海市科委项目(18DZ2284000)。
摘 要:锂离子电容器具有寿命长、兼顾功率密度和能量密度等优点,充分了解其热特性对其广泛应用意义重大。在多种充放电倍率下进行了锂离子电容器的温升测试,并基于MATLAB和COMSOL Multiphysics 5.4软件进行了其热模型建立及研究。结果表明,随着充放电倍率的增大,锂离子电容器的发热量增加;基于MATLAB建立的集总参数热模型可以实现平均绝对误差不超过0.2℃的温升模拟;基于COMSOL构建的热模型中,随着放电倍率增加,温度分布差异增大,而将极耳布置方式改为对角布置可减小温度分布差异,使温度分布更加均匀,更有利于其性能发挥。A lithium-ion capacitor(LIC)has the advantages of long cycle life,high power density,and high energy density.Comprehensive knowledge of LIC thermal characteristics is essential for its practical application.In this study,a temperature rise test of an LIC is performed under various charge and discharge rates,and its thermal model is established and studied based on MATLAB and COMSOL Multiphysics 5.4 software.The results demonstrate that the calorific value of LIC increases with the rise in charge and discharge rates.Based on the lumped parameter thermal model established in MATLAB,the mean absolute error in the temperature rise simulation can be limited to 0.2℃,and the temperature distribution variation increases with the rise in discharge rate.By installing the LIC lugs diagonally on the cell,the temperature difference is reduced,making the temperature more uniform,and the arrangement is advantageous in improving performance.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.142.133.182