能散对直线感应加速器焦斑分布的影响  

Influence of energy spread on the transverse profile of the focused electron beam

作　　者：王科[1] 代志勇[1] 夏连胜[1] 张篁[1] 李劲[1] 范培亮 杨治勇[1] Wang Ke;Dai Zhiyong;Xia Liansheng;Zhang Huang;Li Jin;Fan Peiliang;Yang Zhiyong(Institute of Fluid Physics,CAEP,P.O.Box 919-108,Mianyang 621900,China)

机构地区：[1]中国工程物理研究院流体物理研究所,四川绵阳621900

出　　处：《强激光与粒子束》2022年第9期25-29,共5页High Power Laser and Particle Beams

基　　金：国家自然科学基金项目(11875242,11805191)。

摘　　要：介绍了均方根(RMS)、半高全宽(FWHM)和50%调制传递函数(MTF)等效均匀分布等焦斑尺寸评价方法。针对一台直线感应加速器,通过建立理论模型和开展逐束片PIC模拟研究了长脉冲(约100 ns)电子束的聚焦过程,分析了能量、流强与平顶区差异较大的脉冲上升/下降沿对FWHM和MTF焦斑尺寸的影响。研究结果表明:能散度较大的束流上升/下降沿会导致束流焦斑,尤其是MTF焦斑显著增长,在模拟结果中FWHM尺寸增长约9%,而MTF尺寸增长达到约24%,是目前导致束流底宽偏大的主要因素之一。A brief introduction to evaluating the beam size with the Root-Mean-Square(RMS)value,the fullwidth-half-maximum(FWHM)value and the modulation-transfer-function(MTF)value is given in this paper.The focusing of the long pulse electron beam(~100 ns)in an induction linear accelerator is studied by both theoretical analysis and numerical simulation,the contribution of the energy and current difference of the rising edge and the falling edge to the final beam size are discussed.In our results,the rising edge and the falling edge of the beam with large energy deviation may lead to a significant increase of the beam size,especially the MTF beam size,i.e.the FWHM beam size is increased by about 9%while the MTF beam size is increased by about 24%.

关 键 词：直线感应加速器 焦斑 能散 束片 

分 类 号：TL501[核科学技术—核技术及应用]