低压成套无功功率补偿装置新旧标准及关键试验对比分析  

Comparative Analysis of New and Old Standards and Key Tests of Low-voltage Reactive Power Compensation Assemblies

作　　者：陈广柱 杨玉昕 张雅楠 吕培禾 王建全 CHEN Guangzhu;YANG Yuxin;ZHANG Yanan;LÜPeihe;WANG Jianquan(Tianjin Tianchuan Electric Control Equipment Test Co.,Ltd.,Tianjin 300300,China;Tianjin Research Institute of Electric Science Co.,Ltd.,Tianjin 300180,China)

机构地区：[1]天津天传电控设备检测有限公司,天津300300 [2]天津电气科学研究院有限公司,天津300180

出　　处：《电气传动》2022年第16期32-36,共5页Electric Drive

基　　金：天津电气科学研究院有限公司自立项目(JC2021ZL001)。

摘　　要：新版本GB/T 15576—2020《低压成套无功功率补偿装置》国家标准于2020年11月19日发布,2021年6月1日实施,代替旧标准。通过对新旧标准内容和关键试验进行对比分析,介绍了新标准的试验方法及新旧标准的差异。通过对关键差异试验项目的分析,并依据新标准结合典型试验样品进行实例分析,给出了试验结论。同时针对集成低压无功功率补偿功能验证、涌流试验、噪声测试等试验项目提出了优化观点,为今后新标准的试验方法应用奠定了基础,为开展后续的换版试验提供了重要的借鉴意义。The new version of the national standard GB/T 15576-2020《Low-voltage reactive power compensation assemblies》was released on November 19,2020,and has been implemented on June 1,2021,replacing the old standard.Through comparative analysis of the content of the new and old standards and key tests,the test methods of the new standard and the differences between the new and old standards were introduced.Through the difference analysis of key tests,and based on the new standard combined with the typical test samples for case analysis,the test conclusions were given.At the same time,optimization points were put forward for the test items such as integrated low-voltage reactive power compensation function verification,inrush current test,noise test,etc.,which lays the foundation for the application of new standard test methods in the future,and provides an important reference for the subsequent version change test.

关 键 词：标准换版 低压成套无功功率补偿装置 关键试验 集成低压无功功率补偿功能验证 涌流试验 噪声测试 

分 类 号：TM50[电气工程—电器]