Production of Wood Fibers from Thermally Treated Wood  

作　　者：Maximilien Gibier Pierre Girods Yann Rogaume 

机构地区：[1]Universitéde Lorraine,INRAE,LERMAB,ERBE,Epinal,F-88000,France

出　　处：《Fluid Dynamics & Materials Processing》2022年第5期1427-1439,共13页流体力学与材料加工（英文）

基　　金：This study was realized thanks to the financial support of the French Region“GrandEst”and the financial and technical support of LERMAB,mainly Stéphane AUBERT for his technical support to build the thermal treatment reactor and the software for regulation and data loggins.LERMAB is supported by a grant overseen by the French National Research Agency(ANR)as part of the“Investissements d’Avenir”Program(ANR-11-LABX-0002-01.Lab of Excellence ARBRE)and is part of ICEEL。

摘　　要：The reduction of the hygroscopicity of wood fibers was investigated through a Thermal Treatment(TT)on wood chips performed before the defibering process.The TT and defibering tests were both carried out on a continuous pilot at semi-industrial scale.The thermal treatment study of wood chips,equivalent to a low temperature pyrolysis,was achieved for four conditions(280°C–320°C)for a duration of 10 min.Mass quantification of solids,condensables and gases(FTIR)at the outcome of the thermal treatment allowed to achieve the mass balances for each condition.The increase of the reactor temperature from 280°C to 320°C leads to a lower solid yield(94%–82%)while gaseous(1%–3.8%)and condensable(3%–11%)products increase significantly.Thermally treated wood samples were afterwards successfully defibered in different conditions to produce suitable fibers for insulation panel production.The aim of the study is also to evaluate the effects of the TT on the lowering of energy consumption necessary for the defibering process while producing good quality fibers.Energy consumption during defibering process shows a significant decrease with the increase the TT severity.Fiber morphology is affected by TT and the morphological quality of the fibers decreases as TT severity increases.The mass percentage of dust was also quantified as a quality marker of produced fibers.Measurements of equilibrium moisture(at 20°C and 65%RH)of the different materials(wood chips before and after TT,produced fibers)show a significant effect of the TT on wood chips hygroscopicity(8.2%for untreated wood to 4.1%for TT at 320°C).However,the effect of the TT on the hygroscopicity reduction of thermally treated wood fibers is drastically less significant due to breaking of the wood structure during defibering process.

关 键 词：WOOD fibers thermal treatment defibering process HYGROSCOPICITY energy consumption fibers properties improvement 

分 类 号：TG1[金属学及工艺—金属学]