基于单片机控制的超感智能座便器系统设计  

Design of Supersensible Intelligent Toilet Seat System Based on SCM Control

作　　者：李丽霞 李润金 LI Li-xia;LI Run-jin(College of Automation,Shenyang Institute of Engineering,Shenyang 110136,Liaoning Province;School of Electric Power,Shenyang Institute of Engineering,Shenyang 110136,Liaoning Province)

机构地区：[1]沈阳工程学院自动化学院,辽宁沈阳110136 [2]沈阳工程学院电力学院,辽宁沈阳110136

出　　处：《沈阳工程学院学报（自然科学版）》2022年第3期68-71,共4页Journal of Shenyang Institute of Engineering:Natural Science

摘　　要：以STC89C52单片机作为系统的控制芯片,通过红外光电传感器将检测信号传递给单片机,经过相应处理实现人靠近时接通电源,无人时进入休眠状态,控制电机实现冲大、小水以及排风功能。利用温度传感器实现智能座便器座圈加热,未达到或达到预设温度时,单片机给出加热灯亮或熄灭的信号,并且在LCD1602液晶中显示当前温度。分别以Altium Designer和Proteus为平台设计相应电路图和电路仿真,经过实物测试,超感智能座便器可以实现相应的功能,从而达到减少能源损失的目的。As the control chip of the system,the STC89C52 microcontroller receives the detected signal through the infrared photoelectric sensor,through the corresponding processing to realize the power supply when people close,enter into the sleep state when no one is present,control the motor to achieve large or small water and exhaust function.The temperature sensor is used to realize the heating of intelligent toilet seat.When the preset temperature is not reached or reached,the single-chip microcomputer gives the signal of heating light and off,and displays the current temperature in LCD1602 liquid crystal.Altium Designer as the platform to design the corresponding circuit diagram,Proteus as the platform for circuit simulation,the physical test shows that the supersensible intelligent toilet can achieve the corresponding function,so as to reduce energy loss and achieve the purpose of energy saving.

关 键 词：STC89C52 超感智能座便器 传感器 

分 类 号：TP368.1[自动化与计算机技术—计算机系统结构]