基于GL Studio的飞行模拟器半实物仿真仪表的设计与实现  

Design and Implementation of Semi-Physical Simulation Instrument for Flight Simulator Besed on GL Studio

作　　者：彭昌毅 PENG Changyi(WuHu Hangyi Integrated Equipment Co.Ltd.,Wuhu 241000,China)

机构地区：[1]芜湖航翼集成设备有限公司,安徽芜湖241000

出　　处：《河南科技》2022年第15期31-35,共5页Henan Science and Technology

摘　　要：由于机械式仪表存在制作工艺复杂、制作成本较高、需要设计复杂的控制算法以及指针转动精确不高等问题,且机械表盘结合嵌入式驱动模块的仿真仪表同样存在制作工艺复杂、难以仿真较为复杂的航空仪表等问题。针对上述问题,本研究提出一种嵌入式计算机图形仿真仪表,从而满足小型化、高精度、可更换等要求,采用GLStudio软件架构,并结合拿铁熊猫硬件平台,开发出一种嵌入式飞行模拟器半实物仿真仪表。Summarizing the shortcomings of mechanical instruments,there are problems such as complex production process,high economic cost,complex control algorithm design and inaccurate pointer rotation.For the simulation instrument with mechanical dial combined with embedded drive module,there is also a complex production process,which is difficult to achieve.Simulation of more complex aviation instru⁃ments and other issues.This paper proposes the design and implementation of an embedded computer graphics simulation instrument,which can meet the requirements of miniaturization,high precision,and re⁃placeability.The GL Studio software architecture is combined with the Latte Panda hardware platform to develop a semi-physical embedded flight simulator.Simulation instrument.

关 键 词：飞行模拟器 半实物仿真仪表 GLStudio 嵌入式硬件平台 

分 类 号：TG333[金属学及工艺—金属压力加工]