定距柱正方形排列的螺旋板式换热器的外压稳定性研究  

Stability Study for External Pressured Heat Exchanger with Spiral Plate and Square Arranged Spacing Columns

作　　者：陆怡[1] 刘欢 卫渊钊 王园春 金旭好 文婷 Lu Yi;Liu Benhuan;Wei Yuanzhao;Wang Yuanchun;Jin Xuhao;Wen Ting(Changzhou University,Changzhou 213164,China)

机构地区：[1]常州大学机械与轨道交通学院,江苏常州213164

出　　处：《化工设备与管道》2022年第4期12-18,共7页Process Equipment & Piping

基　　金：2021年江苏省研究生实践创新计划(SJCX21_1205)。

摘　　要：螺旋板作为螺旋板式换热器的主要承压元件,同时受到内压和外压作用,当相邻两通道的压力差达到临界压力时,螺旋板会被压瘪而出现失稳。简化螺旋板模型,利用正交设计的方法,确定了25组带定距柱螺旋板的结构尺寸,并进行非线性屈曲分析。根据分析结果将结构尺寸参数进行无量纲化,并通过多元非线性回归确定了螺旋板外压临界压力的理论计算公式,讨论螺旋板结构参数与临界压力之间的关系,为工程上螺旋板式换热器的外压稳定性设计提供指导。研究结果表明,螺旋板临界压力理论公式的计算误差小于±10%,符合工程应用的精度。As one of the main pressure parts,spiral plate in heat exchanger is subjected to both internal and external pressures.If the differential pressure between adjacent passages reaches critical pressure,the spiral plate will be made flat and unstable.In this article,by using simplified spiral plate model and orthogonal design method,25 groups of structural sizes of spiral plate with spacing column were selected,and nonlinear buckling analysis was carried out.Based on the analysis results,the structural sizes were nondimensionalized,and by using nonlinear regression with multiple variables,the theoretical equation for calculating the critical external pressure for spiral plate was determined.Then the relation of structural parameters of spiral plate and its critical pressure was discussed,which may be referenced in the design of spiral plate heat exchanger subjected to external pressure for the stability of the spiral plate.It was shown from study results that the error from the theoretical equation for critical pressure is smaller than±10%,which reaches accuracy requirement in engineering.

关 键 词：螺旋板 外压稳定性 定距柱 理论计算 

分 类 号：TQ051.5[化学工程] TH122[机械工程—机械设计及理论]