尾灯电镀装饰条注射模设计  

Design of Injection Mold for Plating Trim Strip of Tail Lights

作　　者：蒋燕[1] 邓集华 方迪成 Jiang Yan;Deng Jihua;Fang Dicheng(Shantou Polytechnic,Shantou Gangdong 515078,CHN;Guangzhou Traffic and Transportation Vocational School Guangzhou Guangdong 510440,CHN)

机构地区：[1]汕头职业技术学院,广东汕头515078 [2]广州市交通运输职业学校,广东广州510440

出　　处：《模具制造》2022年第8期26-31,共6页Die & Mould Manufacture

基　　金：汕头职业技术学院2021年科研课题(SZK2021Y02)。

摘　　要：分析了尾灯电镀装饰条塑件的工艺特点,介绍了该塑件注射模的结构设计和工作过程。由于塑件的表面要求后期电镀处理,为了防止其表面出现气痕、冷料,以及防止二次加工去除浇口时损伤A面,采用开放式热流道转冷流道大浇口滑块式搭底浇口一点进胶,一模两腔(左右件),卧式注射成型;运用NX/CAD进行塑件分型设计,塑件B面两处卡接结构采用常规斜顶抽芯方式来实现;为了便于塑件的表面后期电镀处理,在塑件B面增加电镀挂角结构,采用直顶顶出。The technological characteristic of plating trim strip of tail lights was analyzed and introduced the structural desige and operating process of the injection mold for this part.Because the surface of plastic parts requires late electroplating treatment, in order to prevent the appearance of air marks and cold material on the surface, and prevent the damage of A surface when the gate is removed by secondary processing, so this mold innovation uses open hot runner to cold runner large nozzle and one sliding block type bottom gate,two mold cavities(L&R),horizontal injection molding. Using the NX/CAD completed the mold parting surface design, the two clamping structures on the B side of the plastic parts are realized by the conventional inclined top core pulling method. In order to facilitate the electroplating treatment on the surface of the plastic parts in the later stage, the plating rack structure is added on the B side, and the ejection block ejection.

关 键 词：装饰条 热流道 滑块式搭底浇口:电镀挂角 注射模 

分 类 号：TQ320.66[化学工程—合成树脂塑料工业]