以最大热阻最小化为目标的τ形肋构形优化  

Constructal optimization analysis of tau-shaped fin based on minimize maximum thermal resistance

作　　者：张建[1] 王佳琦 唐培智 张朋[1] 王定标[1] 陈炳耀 Zhang Jian;Wang Jiaqi;Tang Peizhi;Zhang Peng;Wang Dingbiao;Chen Bingyao(School of Mechanical and Power Engineering,Zhengzhou University,Zhengzhou 450001,China;China Nuclear Power Engineering Co.,Ltd.Zhengzhou Branch,Zhengzhou 450001,China;Cuangdong Sanvo Holdings Co.,Ltd.Zhongshan 528400,China)

机构地区：[1]郑州大学机械与动力工程学院,郑州450001 [2]中国核电工程有限公司郑州分公司,郑州450001 [3]广东三和控股有限公司,中山528400

出　　处：《低温与超导》2022年第7期57-62,共6页Cryogenics and Superconductivity

基　　金：国家自然科学基金(21576245)资助。

摘　　要：以τ形肋片为研究对象,以最大热阻最小化为优化目标,基于构形优化理论,研究了肋片主干和分支的结构参数对目标函数的影响。结果表明:肋片主干结构对肋片性能的影响较大,而肋片分支结构则对肋片性能的影响很小,可以忽略不计。同时,得到了该模型的最优构形,即当L_(1)/L_(0)=0.194和t_(1)/t_(0)=6时,最优目标值为(R_(1))_(min)=45.2033。In this paper, the τ-shaped fin was taken as the research object, and the optimization objective is to minimize the maximum thermal resistance. Based on the configuration optimization theory, the influence of the structural parameters of the fin trunk and branches on the objective function was studied. The results show that the rib trunk structure has a great influence on the fin performance, while the fin branch structure has little effect on the fin performance and can be ignored. At the same time, the optimal configuration of the model is obtained, that is, when L_(1)/L_(0)=0.194andt_(1)/t_(0)=6, the optimal target value is (R_(1))_(min)=45.2033.

关 键 词：构形优化 无量纲最大热阻最小化 τ形肋片 对流换热 广义热力学 

分 类 号：TK12[动力工程及工程热物理—工程热物理]