扣件式钢管支架现场检查验收要点解析  

Analysis on Key Points of on-site Inspection and Acceptance of Fastener Type Steel Tuber Falsework

作　　者：万霆 王永泉 郭正兴 李天福 WAN Ting;WANG Yong-quan;GUO Zheng-xing;LI Tian-fu(Jiangsu Jianke Appraisal Consulting Co.,Ltd,Nanjing Jiangsu 210000 China;School of Architectural Engineering,Nanjing Institute of Engineering,Nanjing Jiangsu 210000 China;School of Civil and Traffic Engineering,Chengxian College of Southeast University,Nanjing Jiangsu 210000 China;School of Civil Engineering,Sanjiang University,Nanjing Jiangsu 210000 China)

机构地区：[1]江苏建科鉴定咨询有限公司,江苏南京210000 [2]南京工程学院建筑工程学院,江苏南京210000 [3]东南大学成贤学院土木与交通学院,江苏南京210000 [4]三江学院土木工程学院,江苏南京210000

出　　处：《江苏建筑》2022年第3期89-92,共4页Jiangsu Construction

基　　金：住建部科技计划资助项目(2020-K-165);南京工程学院高层次引进人才科研启动基金资助项目(YKJ201928);江苏省高等学校基础科学(自然科学)研究项目资助(21KJD560007)。

摘　　要：为保证扣件式钢管支模架的安全性,架体搭设完成后进行搭设规范性检查是必须的。文章结合数十项实际工程现场检查验收实例,总结分析了扣件式钢管支架7种常见的搭设不规范做法,建议作为现场检查验收的重点。In order to ensure the safety of steel tuber falsework,it is necessary to check the erection standardization after the erection of the falsework.Combined with the on-site inspection and acceptance examples of dozens of practical projects,seven non-standard erection methods of steel tuber falsework were summarized and analyzed,which is suggested to be the focus of on-site inspection and acceptance.

关 键 词：扣件式钢管支架 检查要点 架体高宽比 计算长度 剪刀撑 

分 类 号：TU763[建筑科学—建筑技术科学]