水淬焙烧渣中金铂钯的氯化浸出  

Chlorinated Leaching of Gold, Platinum and Palladium from Water-quenched Roasting Slag

作　　者：朱佳俊 黄凯[1] 马育新 李渭鹏 ZHU Jiajun;HUANG Kai;MA Yuxin;LI Weipeng(School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China;Fukang Smelter,Xinjiang Xinxin Mining Co.,Ltd.,Fukang 831500,China)

机构地区：[1]北京科技大学冶金与生态工程学院,北京100083 [2]新疆新鑫矿业股份有限公司阜康冶炼厂,新疆阜康831500

出　　处：《有色金属工程》2022年第8期62-69,共8页Nonferrous Metals Engineering

基　　金：国家重点研发计划项目(2019YFC1907403)。

摘　　要：为了回收水淬焙烧渣中的贵金属,提出采用H_(2)SO_(4)-NaCl-NaClO_(3)体系从冰铜水淬渣中浸出金、铂、钯。系统研究了固液比、硫酸浓度、氯化钠浓度、溶液氧化性、浸出温度、粒度和浸出时间等主要参数对浸出的影响。H_(2)SO_(4)-NaCl-NaClO_(3)浸出冰铜水淬渣中金铂钯的优化工艺参数为:硫酸浓度0.5 mol/L、氯化钠浓度25%、初始ORP(氧化还原电位)值1 062 mV,在此条件下,金、铂、钯的浸出率分别为90%、89%、88%。In order to recover precious metals in water-quenched roasting slag,a method of leaching gold,platinum and palladium from matte water-quenched slag was proposed using H_(2)SO_(4)-NaCl-NaClO_(3) leaching solution system.The effects of main parameters including the solid-liquid ratio,sulfuric acid concentration,sodium chloride concentration.solution oxidation,leaching temperature,particle size and leaching time on leaching were systematically studied.The optimized process parameters of H_(2)SO_(4)-NaCl-NaClO_(3) leaching of gold,platinum and palladium from water-quenched copper matte slag are that the concentration of sulfuric acid is 0.5 mol/L,the concentration of sodium chloride is 25%,and the initial ORP(redox potential)value is 1062 mV,under the optimal conditions,the leaching rates of gold,platinum and palladium are 90%,89%and 88%,respectively.

关 键 词：冰铜水淬渣 浸出 金 铂 钯 

分 类 号：TF111[冶金工程—冶金物理化学]