湿式粉磨提高某磷矿粉释磷特性研究  

Study on Improvement of Phosphorus Release Characteristics of a Phosphate Rock Powder by Wet Grinding

作　　者：李营营 李国峰 单志伟 李凤久 梁冰 Li Yingying;Li Guofeng;Shan Zhiwei;Li Fengjiu;Liang Bing(School of Mining Engineering,North China University of Technology,Tangshan,Hebei,China)

机构地区：[1]华北理工大学矿业工程学院,河北唐山063210

出　　处：《矿产综合利用》2022年第4期188-192,共5页Multipurpose Utilization of Mineral Resources

基　　金：国家自然科学基金项目(51804123);华北理工大学研究生创新项目(CXZZB2019128);华北理工大学青年基金项目(Z201711)

摘　　要：采用行星式球磨机对P_(2)O_(5)含量为27.07%的磷矿粉进行超细粉磨,在已确定的适宜干式粉磨工艺参数下,考查了矿浆浓度、磨矿时间对粉磨产品粒度和枸溶率的影响。借助X射线衍射分析、扫描电镜分析、接触角测量仪等测试手段,分别考查了不同磨矿时间条件下粉磨产品的结晶程度、微观形貌和表面自由能的变化规律。结果表明:在矿浆浓度为55%,磨矿时间为150 min条件下,粉磨产品中位径为1.74μm、枸溶率达到66.24%。随着磨矿时间的延长,磷矿粉中磷矿物结晶程度显著降低,粉磨产品中基本不存在大颗粒,产品接触角逐渐减少,相应的表面自由能呈增加趋势,提高了磷矿粉的释磷特性。Planetary ball mill was used for ultra-fine grinding of phosphate rock powder with P_(2)_(5) content of 27.07%.The influences of pulp concentration and grinding time on particle size and solubility of powder products were investigated under the determined optimum dry grinding process parameters.By means of X-ray diffraction analysis,scanning electron microscope analysis and contact Angle measuring instrument,the variation law of crystallization degree,microstructure and surface free energy of pulverized products under different grinding time were investigated.The results showed that under the condition of 55%pulp concentration and 150 min grinding time,the median diameter and solubility of powder products were 1.74μm and 66.24%,respectively.With the extension of grinding time,the crystallization degree of phosphate ore in the phosphate ore powder decreases significantly,there is basically no large particle in the powder product,the product contact angle gradually decreases,the corresponding surface free energy shows an increasing trend,and the phosphorus release characteristics of the phosphate ore powder are improved.

关 键 词：磷矿粉 超细粉磨 磨矿时间 

分 类 号：TD951[矿业工程—选矿]