冻融温变速率对岩石受载特性的影响规律  

Influence of freeze-thaw temperature change rate on mechanics feature of rock during loading process

作　　者：刘成禹[1,2] 郑道哲 张向向 陈成海 曹洋兵 LIU Cheng-yu;ZHENG Dao-zhe;ZHANG Xiang-xiang;CHEN Cheng-hai;CAO Yang-bing(Zijin School of Geology and Mining,Fuzhou University,Fuzhou,Fujian 350116,China;Fujian Provincial Universities Engineering Research Center of Geological Engineering,Fuzhou University,Fuzhou,Fujian 350116,China)

机构地区：[1]福州大学紫金地质与矿业学院,福建福州350116 [2]福州大学地质工程福建省高校工程研究中心,福建福州350116

出　　处：《岩土力学》2022年第8期2071-2082,2175,共13页Rock and Soil Mechanics

基　　金：国家自然科学基金(No.41272300);中铁隧道局集团有限公司科技创新重点项目(隧研合:2018-53);福州大学开放测试基金(No.2020T007)。

摘　　要：以贺兰山岩画、云冈石窟等中常见的硅质胶结砂岩为研究对象,对不同温变速率冻融后岩样进行称重、超声波测试和单轴压缩试验,探究了冻融后岩石物理力学性质随冻融温变速率的变化规律;根据冻融后岩石受载过程中的声发射和微震特征,揭示了温变速率对冻融后岩石内部不同尺度裂纹扩展的影响规律及其内在机制。研究表明:(1)随着温变速率增加,岩样冻融后的微裂纹增多,颗粒间联结强度减弱,峰值强度、弹性模量降低,破坏应变及损伤参量D_(e)、D_(v)增大;(2)冻融岩石受载过程中,微裂纹具有“初始压密―扩展孕育―急速扩展”的演化特征,宏观裂纹演化过程可分为“匀速扩展-急速扩展”两个阶段,其中宏观裂纹的急速扩展阶段还呈现出“孕育-扩展-再孕育-再扩展”的波浪式发展特点;温变速率越大,冻融后岩石受载过程中的微裂纹、宏观裂纹扩展越快,且更易于进入急速扩展阶段;当温变速率增大到一定数值后,微裂纹、宏观裂纹从加载开始即以较高速率扩展,直至岩样破坏;(3)微裂纹孕育阶段和加载全过程的声发射振铃相对增长速率,以及宏观裂纹匀速扩展阶段的相对时长、微震振铃相对增长速率均与损伤参量D_(e)、D_(v)具有较好的拟合关系,能够反映冻融循环对岩石的初始损伤作用;(4)冻胀力随温变速率增加而增大,导致不同温变速率冻融后岩样的初始损伤不同,这是引起冻融后岩石受载过程中裂纹扩展、声震特性出现显著差异的内在原因。The siliceous and colloidal sandstone is common in Helan Mountains Rock Painting and Yungang Grottoes.The weighing test,ultrasonic test and uniaxial compression test were conducted on the rock subjected to freeze-thaw cycles at different temperature change rates to investigate the influences of temperature change rate on the physical and mechanical properties.The evolution and internal mechanism of crack propagation in rock after freeze-thaw cycles at different temperature change rates were revealed based on the features of acoustic emission and microseism during uniaxial compression loading process.As the temperature change rate increases,the micro-cracks increase and the joint force between particles decreases gradually,resulting in the lower peak strength and elastic modulus.Thus,the failure strain and damage parameters D_(e) and D_(v) increase with the increase of temperature change rate.During the loading process of rock,the micro-crack propagation progress shows an’initial compaction–propagation incubation–rapid propagation’evolution feature,while the macro-crack propagation progress can be divided into two stages as’uniform propagation–rapid propagation’.And the rapid growth stage of the macro-crack also shows the wave-like development characteristic of’incubation–propagation–incubation–propagation’.The micro-crack and macro-crack propagation rate during the loading process increases with the temperature change rate.It is easier for micro-crack and macro-crack to enter each rapid propagation stage at a larger temperature change rate.When the temperature change rate increases to a certain value,the micro-crack and macro-crack propagate at a high rate from the beginning of loading progress to the failure of rock sample.The damage parameters D_(e) and D_(v) have a good fitting relationship with the relative growth rate of acoustic emission ring down count during the propagation incubation stage and the whole loading process for micro-crack,and the relative length and relative growth ra

关 键 词：冻融循环 温变速率 力学特性 声发射 微震 

分 类 号：TU45[建筑科学—岩土工程]