矿用胶带切割机的研发与应用  

Development and application of mining belt cutting machine

作　　者：谢东辰 Xie Dongchen(Yongcheng Coal Employee Training School,Yongcheng 476600,China)

机构地区：[1]永煤职工培训学校,河南永城476600

出　　处：《能源与环保》2022年第8期280-283,共4页CHINA ENERGY AND ENVIRONMENTAL PROTECTION

摘　　要：为了提高胶带的二次利用率、减少生产成本、提高工人劳动效率,研发了新型矿用胶带切割机。该机主要由电动机、减速箱、自制卷带滚筒、网络辊输送装置、机架、切割平台、压紧装置、限位装置、喷雾降尘系统、电控操作台等组成。选用胶带(三角带)传动作为传动系统,具有收缩性小、抗变形、速度快、传动力稳等特点;设计了电控操作设备,安装了以漏电断路器、交流接触器,并具有紧急停止、电压表、电流表、信号指示等装置,减少了电动机的损坏,极大地方便了故障的判断,对设备和人身安全起到了保护作用;并研究了卷带滚筒的制作以及切割速度的选择。研究开发的胶带切割机是将电动机的传动与切割片连接为一体化的机电设备,可用于对废旧胶带的切割、校正等,在煤矿行业中有着广泛而重要的应用。In order to improve the secondary utilization rate of the tape,reduce the production cost,and improve the labor efficiency of the workers,this paper has developed a new type of tape cutting machine.The mining tape cutting machine is mainly composed of a motor,a reduction box,a self-made tape drum,a network roller conveyor,and a frame.,cutting platform,compression device,limit device,spray dust reduction system,electronic control console,etc.Adopted the belt(V-belt)transmission as the transmission system,which has the characteristics of small shrinkage,resistance to deformation,fast speed,stable transmission force,etc.;electronic control operation equipment was designed,and leakage circuit breakers and AC contactors were installed,as well as emergency stop,voltmeter,ammeter,signal indicator and other devices.These devices have reduced the damage of the motor and greatly facilitate the judgment of the fault,and protect the equipment and personal safety;and studied the production of the winding drum and the selection of the cutting speed.The tape cutting machine researched and developed is an integrated electromechanical equipment that connects the drive of the motor and the cutting blade.It can be used for cutting and correcting waste tape.It has a wide range of important applications in the coal industry.

关 键 词：矿用胶带切割机 传动系统 电控操作设备 自制卷带滚筒 压紧装置 喷雾降尘系统 

分 类 号：TD634.1[矿业工程—矿山机电]