医用器械面板支架多工位级进模设计  

Design of multi-station progressive die for panel bracket of medical instruments

作　　者：陈景茂 黄珍媛[1] 苏达权 周剑国 王子恒 CHEN Jingmao;HUANG Zhenyuan;SU Daquan;ZHOU Jianguo;WANG Ziheng(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510641,Guangdong China;Guangdong Longze Technology Group Co.,Ltd.,Dongguan 523000,Guangdong China)

机构地区：[1]华南理工大学机械与汽车工程学院,广东广州510641 [2]广东龙泽科技集团有限公司,广东东莞523000

出　　处：《锻压装备与制造技术》2022年第4期108-111,共4页China Metalforming Equipment & Manufacturing Technology

摘　　要：医用器械类金属板材制品的表面质量和尺寸精度要求通常较高。本文针对某医用器械面板支架零件进行冲压工艺和多工位级进模具结构设计;针对该支架零件的折弯部分宽度大、高度小、回弹较大的问题,采用在弯曲前对折弯位置进行预压的工艺,确保了折弯尺寸的精度;在冲压工艺方案中设计了压毛边工序,确保支架零件表面无毛刺。经实际生产验证,本设计工艺保证了产品的质量,级进模结构合理,生产效率较高,能够实现大批量生产。The surface quality and dimensional accuracy requirements of sheet metal products for medical devices are generally relatively high. In the text, the stamping process and the multi-station progressive die structure have been designed for a panel bracket part of some medical device;aiming at the this bracket problems of big width, small height and large springback, the pre-pressing process has been adopted to the bending position before bending to ensure the accuracy of the bending size;the process of pressing burrs has been designed in the stamping process plan to ensure the surface of the bracket parts without burr;it is verified by actual production that the design process in the text can ensure the quality of the product and high production efficiency with reasonable progressive die structure, which realize the mass.

关 键 词：面板支架 级进模 折弯 回弹 毛刺 

分 类 号：TG385.2[金属学及工艺—金属压力加工]