锅炉定期检验报告中有关压力参数的确定  

Determination of pressure parameters in boiler periodic inspection report

作　　者：殷望庆 YIN Wang-qing(Anqing Special Equipment Supervision and Inspection Center,Anqing 24600,China)

机构地区：[1]安庆市特种设备监督检验中心,安徽安庆246000

出　　处：《锅炉制造》2022年第5期63-64,共2页Boiler Manufacturing

摘　　要：对锅炉进行定期检验时,同一台锅炉的内外检验,在允许操作条件下,有两个结论:同台锅炉的额定压力和工作压力。检验结论的产生导致了两方面的问题:一是检验结论的相互冲突,二是对使用单位产生影响。针对上述问题,通过对锅炉定期检验时允许使用压力的确定,明确锅炉定期检验报告中有关压力参数的填写。During the regular inspection of boilers and the internal and external inspection of the same boiler,there are two conclusions under permitted operating conditions:rated pressure and working pressure of the same boiler.The emergence of inspection conclusions leads to two problems:one is the conflict of inspection conclusions,the other is the impact on the use of units.In view of the above problems,through the determination of the allowable pressure used in the periodic inspection of the boiler,it is clear to fill in the pressure parameters in the periodic inspection report of the boiler.

关 键 词：允许使用压力 额定压力 工作压力 

分 类 号：TK228[动力工程及工程热物理—动力机械及工程]