检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:姜卓尔 王海涛[1,2,3] 赵军[1,2,3] JIANG Zhuoer;WANG Haitao;ZHAO Jun(Institute of Nuclear and New Energy Technology,Tsinghua University,Beijing 100084,China;Collaborative Innovation Center of Advanced Nuclear Energy Technology,Beijing 100084,China;Key Laboratory of Advanced Reactor Engineering and Safety,Ministry of Education,Beijing 100084,China)
机构地区:[1]清华大学核能与新能源技术研究院,北京100084 [2]教育部先进核能技术协同创新中心,北京100084 [3]先进反应堆工程与安全教育部重点实验室,北京100084
出 处:《原子能科学技术》2022年第8期1651-1661,共11页Atomic Energy Science and Technology
基 金:大型先进压水堆及高温气冷堆核电站国家科技重大专项课题“多模块高温气冷堆的概率风险评价技术研究和安全目标建立”(2018ZX06902015)。
摘 要:高温气冷堆核电厂采取多个反应堆模块匹配1个汽轮机的设计方式,即1台高温气冷堆机组会包含多个反应堆模块,这使多个高温气冷堆模块在地震外部事件下存在明显的相关性,因此在利用概率风险分析方法来全面地识别和评价高温气冷堆的地震风险时,需要从机组的角度充分考虑和模化机组内多个反应堆模块间的相关性。高温气冷堆示范电站已完成了较为完整的单模块地震概率安全分析,本文将以该分析结果为基础梳理出高温气冷堆多模块地震概率安全分析的关键技术要素并进行研究,研究内容包括多模块事件序列建模和地震相关性失效评价等关键技术,并针对多模块高温气冷堆提出了应用策略。然后以双模块设计的高温气冷堆示范电站为对象,以地震导致丧失厂外电始发事件为代表,对多模块高温气冷堆地震概率安全分析进行了实例分析获得远低于概率安全目标的释放类频率,且分析得到了高温气冷堆多模块事件序列建模策略与地震相关性失效的评价路线可行这一重要结论。With the design of multiple reactor modules coupling with one steam turbine generator,the high temperature gas-cooled reactor(HTR)‘unit’contains multiple reactor modules,which means HTR will endure evident extra impacts of correlations under seismic external events.Therefore,it requires view of the whole HTR unit to fully integrate the correlations from different reactor modules with the overall seismic probabilistic safety analysis(PSA)for multi-module HTR nuclear power plant seismic risks.An almost comprehensive single-module seismic PSA of high temperature gas-cooled reactor pebble bed module(HTR-PM)has already been accomplished.Based on the single-module seismic PSA,the key technologies,which consist of the multi-module event sequence modeling and seismic failure correlation evaluation,of seismic PSA for multi-module HTR are recognized and researched.With the purpose of a reasonable representation of system correlations among several HTR reactor modules as well as the omission of unnecessary function events,the key technology multi-module event sequence modeling needs to implement the combination of common function events in pending single-module event trees.A process is developed by coupling the modeling methods of International Atomic Energy Agency(IAEA)with the site-specific characteristics of multi-module HTR-PM:single-module event tree function events preprocessing;all function events rearranging in order;multi-module modeling based on the first fundamental event tree.It should be noted that an important part of the simplification of multi-module event tree branches is the consequence preprocessing which mainly depends on the definition of the safety goal and the amount of HTR modules.The other key technology seismic failure correlation evaluation reconsidered for the assumption of seismic failure correlation in the single-module seismic PSA may lead to unacceptable results in the multi-module seismic PSA.In this paper,four suggested seismic failure correlation evaluation methods by NRC were reviewed
分 类 号:TL364.5[核科学技术—核技术及应用]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7