热处理对高碳铬铁颗粒增强Q235钢基表面复合材料组织与性能的影响  

Effect of Heat Treatment on Microstructure and Properties of Q235Steel Matrix Composites Reinforced by High Carbon Ferrochromium Particles

作　　者：陈鸣 李青春[1] 薛艳杰 李宝德 李博 常国威[1] CHEN Ming;LI Qing-chun;XUE Yan-jie;LI Bo;LI Bao-de;CHANG Guo-wei(School of Materials Science and Engineering,Liaoning University of Technology,Jinzhou 121001,China)

机构地区：[1]辽宁工业大学材料科学与工程学院,辽宁锦州121001

出　　处：《辽宁工业大学学报（自然科学版）》2022年第4期228-231,共4页Journal of Liaoning University of Technology(Natural Science Edition)

摘　　要：采用真空消失模铸造法制备了高铬铸铁颗粒增强Q235钢基表面复合材料,并进行不同奥氏体化温度的热处理。结果表明,复合材料经930℃保温1 h空冷,450℃保温3 h空冷处理后,复合层碳化物尺寸减小,基材组织细化,珠光体片层间距降低,硬度和耐磨性能提高。且随着奥氏体化温度的升高,复合材料的耐磨性能逐渐增强。Q235 steel matrix surface composites reinforced by high carbon ferrochrome particles were prepared by vacuum vanishing casting infiltration, and the heat treatment with different austenitizing temperature was finished. The results show that after the composite material was air-cooled by holding at 930℃ for 1h and 450℃ for 3h, the carbide size of the composite layer was reduced, the organization of the base material was refined, the pearlite sheet layer spacing was reduced,and the hardness and wear resistance were improved. With the increase of austenitizing temperature, the wear resistance of the composite was improved.

关 键 词：复合材料 高碳铬铁颗粒 热处理 耐磨性能 

分 类 号：TG156.1[金属学及工艺—热处理]