棒材打捆成型器的自适应捆径改进  

Improvement of Bar Bundling Shaper for Self-adapting to the Diameter of Bundles

作　　者：陈烨 戴文笠 张穗斌 洪云辉 CHEN Ye;DAI Wen-li;ZHANG Sui-bin;HONG Yun-hui(SGIS Songshan Co.,Ltd..of Baowu Group Zhongnan Iron and Steel,Shaoguan,Guangdong,512123,P.R.Chinag)

机构地区：[1]宝武集团中南钢铁广东韶钢松山股份有限公司,广东韶关512123

出　　处：《南方金属》2022年第5期53-55,共3页Southern Metals

摘　　要：采用CAD模拟机械运动轨迹等方法,通过调整现有棒材打捆成型器的油缸行程、连杆铰接点位置及连杆长度等措施,实现成型器自适应捆径功能:不同捆径的捆包上方45°角的位置在同一条垂线上,不同捆径的捆包为圆形或近似圆形。This article adopts methods such as using CAD to simulate mechanical motion trajectory and measures such as adjusting the cylinder stroke, position of hinge point and length of connecting rod of the existing bar bundling shaper, to realize the function of bar bundling shaper: self-adapting to the diameter of bundles, namely each point where outer circle of bundle with different bundle diameter and bundling radius at an angle of 45 degrees from the horizontal intersect is on the same vertical line, bundles with different bundle diameter are round or approximately round.

关 键 词：棒材 成型器 打捆 

分 类 号：TG333.2[金属学及工艺—金属压力加工]