东平宏达选矿厂破碎流程优化探讨  

Discussion on optimization of crushing process in the Dongping Hongda dressing plant

在线阅读下载全文

作  者:董风芝[1] 罗少慧 战川 李同家 DONG Fengzhi;LUO Shaohui;ZHAN Chuan;LI Tongjia(School of Resources and Environmental Engineering,Shandong University of Technology,Zibo 255049,China;Shandong Jingu Energy Technology Company Limited,Zibo 255000,China;Shandong Dongping Hongda Mining Company Limited,Dongping 271000,China)

机构地区:[1]山东理工大学资源与环境工程学院,山东淄博255049 [2]山东金谷能源科技有限公司,山东淄博255000 [3]山东东平宏达矿业有限公司,山东东平271000

出  处:《山东理工大学学报(自然科学版)》2022年第6期63-66,共4页Journal of Shandong University of Technology:Natural Science Edition

摘  要:根据东平宏达选矿厂流程考查结果,对破碎流程设备及工艺参数进行了分析,指出了破碎流程中存在的问题。结果表明:高压辊磨机工作效率较低,给料偏细而产品偏粗,挤压粉碎的优势没有得到充分体现。提出了对破碎流程进行优化提高的措施,圆振动筛筛孔由15 mm增大到20 mm,弛张筛筛孔由8 mm减少到4 mm;此外,优化高压辊磨机工作参数,对筛上物料进行预选抛尾等,可以提高破碎系统处理能力,并降低最终产品粒度,达到碎磨作业总体节能降耗的目的。Through on-the-spot investigation into process of Dongping Hongda dressing plant,the equipment and process parameters of the crushing process were analyzed,and the problems were summarized.The results showed that high-pressure grinding roller mill presented a poor crushing efficiency with a low reduction ratio,so as that the advantages of crushing by extrusion were not fully reflected.A measure to optimize the crushing process was put forward,including increasing the circular vibrating size from 15 mm to 20 mm and reducing the flip-flow screen size from 8 mm to 4 mm.In addition,optimizing the working parameters of high-pressure grinding roller and pre-selecting the oversize samples were suggested,which could improve the processing capacity of the crushing system and reduce the particle size of the crushing product.As a result,energy saving and consumption reduction of the dressing plant can be realized by the above measures.

关 键 词:破碎流程 高压辊磨机 弛张筛 预选 

分 类 号:TD921[矿业工程—选矿]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象