Cotton stalk restitution coefficient determination tests based on the binocular high-speed camera technology  

作　　者：Bingcheng Zhang Xuegeng Chen Rongqing Liang Jiali Li Xinzhong Wang Hewei Meng Za Kan 

机构地区：[1]College of Mechanical and Electrical Engineering ShiHezi University,Shihezi 832000,Xinjiang,China [2]School of Agriculture Engineering Jiangsu University,Zhenjiang 212013,Jiangsu,China [3]Engineering Research Center for Production Mechanization of Oasis Special Economic Crop,Ministry of Education,Shihezi 832000,China

出　　处：《International Journal of Agricultural and Biological Engineering》2022年第4期181-189,共9页国际农业与生物工程学报（英文）

基　　金：This work was financially supported by the funding of the Southern Xinjiang Key Industry Innovation and Development Support Program(Grant No.2020DB008);the Graduate Education Innovation Project of Xinjiang Uygur Autonomous Region(Grant No.XJ2022G085);the Open Fund of Jiangsu Province and Education Ministry Co-sponsored Synergistic Innovation Center of Modern Agricultural Equipment(Grant No.XTCX2006);the National Natural Science Foundation of China(Grant No.52065058).

摘　　要：The restitution coefficient(RC)of cotton stalks is an important elementary physical parameter that is required to establish the crushing mechanical model and research the film residue separation machinery.In this study,the calculation method of restitution coefficient considering the rotation motion of stalk-shaped agricultural materials was derived based on the principle of kinematics and the energy restitution coefficient method,and a test bench for measuring the RC was designed and built.The effects of collision material,moisture content,length,diameter,release height,and collision angle respectively on the RC were investigated by single-factor experiments and orthogonal experiments,and the regression models between influence factors and the RC were established.The results showed that Q235 showed the highest value of the RC,and it was followed by cotton stalks and soil lumps,sequentially.The RC of cotton stalks decreased with the increase of moisture content and diameter,while it increased at first and then decreased with the increase of length.As the release height was less than 500 mm,the RC increased with the increased release height.As the collision angle was less than 40°,the RC showed a linear increasing trend.The significance of the effects of factors on RC decreased with the following sequence:collision angle,length,release height,diameter,and moisture content.Length,collision angle,and release height were extremely significant.The contrast test results showed that the values based on Newton’s restitution coefficient method were smaller than that based on the energy restitution coefficient method.The verification test showed that the predicted rebound height of cotton stalks calculated based on the energy restitution coefficient method was closer to the actual rebound height,and the relative error was less than 5%.

关 键 词：high-speed camera technology cotton stalk COLLISION restitution coefficient determination test 

分 类 号：O43[机械工程—光学工程]