冷轧连退炉内薄宽规格深冲带钢褶皱缺陷成因分析及控制措施  

Causes analysis and control measures of wrinkle defects of thin and wide gauge deep-drawing strip in continuous annealing furnace

作　　者：徐国军 胡华东 吴价宝 宋刚 陈庆军 许铭 XU Guojun;HU Huadong;WU Jiabao;SONG Gang;CHEN Qingjun;XU Ming(Shandong Iron and Steel Group Rizhao Co.,Ltd.,Rizhao 276800,China;Zhejiang Communications Resources Invesment Co.,Ltd.,Hangzhou 310020,China)

机构地区：[1]山东钢铁集团日照有限公司,山东日照276800 [2]浙江交通资源投资有限公司,浙江杭州310020

出　　处：《轧钢》2022年第4期143-146,共4页Steel Rolling

摘　　要：针对冷轧连退炉内薄宽规格深冲带钢易出现褶皱缺陷的问题,分析了炉辊凸度对带钢褶皱缺陷的影响,通过带钢临界张力计算公式推导出了炉辊危险系数计算公式。结果表明:炉辊凸度越大,炉辊危险系数越大,带钢越易出现褶皱缺陷;经危险系数计算公式,可快速判断炉辊凸度值是否合理,将炉辊预判凸度值带入危险系数计算公式反复验证,可以快速获得合适的炉辊凸度值,避免褶皱缺陷的出现,提高了褶皱缺陷控制效率。In view of the problem of wrinkle defects of cold rolled thin and wide gauge deep-drawing strips in continuous annealing furnace, the influence of furnace roll crown on strip wrinkle defects was analyzed, and the furnace roll risk coefficient calculation formula was deduced through the calculation formula of strip critical tension. The results show that the greater the crown of the furnace roll, the greater the risk coefficient of the furnace roll, and the more prone to wrinkle defects of the strip. Through the calculation formula of the risk coefficient, it can be quickly judged whether the crown value of the furnace roll is reasonable. Bring the pre-judged crown value of the furnace roll into the risk coefficient calculation formula for repeated verification, the appropriate crown value of the furnace roll can be quickly obtained to avoid the appearance of wrinkle defects and improve the control efficiency of wrinkle defects.

关 键 词：褶皱缺陷 宽薄规格 深冲钢 炉辊 临界张力 危险系数 

分 类 号：TG335.12[金属学及工艺—金属压力加工]