含浸凝胶自润滑轴承材料的制备及性能研究  

Preparation and Performance of Gel-Impregnated Bearing Self-Lubricating Material

作　　者：王玉荣 蔡美荣[2] 邢喜民[3] 郭峰 周峰 WANG Yurong;CAI Meirong;XING Ximin;GUO Feng;ZHOU Feng(School of Mechanical&Automotive Engineering,Qingdao University of Technology,Shandong Qingdao 266520,China;State Key Laboratory of Solid Lubrication,Lanzhou Institute of Chemical Physics,Chinese Academy of Sciences,Gansu Lanzhou 730000,China;School of Mathematics and Physics,Xinjiang Institute of Engineering,Xinjiang Urumqi 830023,China)

机构地区：[1]青岛理工大学机械与汽车工程学院,山东青岛266520 [2]中国科学院兰州化学物理研究所固体润滑国家重点实验室,甘肃兰州730000 [3]新疆工程学院数理学院,新疆乌鲁木齐830023

出　　处：《摩擦学学报》2022年第4期792-802,共11页Tribology

基　　金：国家重点研发计划(2021YFA0716304);国家自然科学基金(21972153);兰州化学物理研究所固体润滑国家重点实验室开放基金(LSL-1914);山东省自然科学基金青年项目基金(ZR2021QE123)资助。

摘　　要：利用新型凝胶润滑剂替代传统的润滑油或脂灌入铁基和聚酰亚胺多孔轴承材料中获得一种新型自润滑轴承材料,并研究制备工艺、储油性能和润滑性能.在摩擦热的作用下,凝胶润滑剂由半固态转变为液体,从轴承材料的孔隙中渗出,实现自润滑.而且,凝胶在液态下大大提高基础油的黏度,减少高速运转时轴承的甩油问题;摩擦结束后,凝胶润滑剂又能再次冷凝并储存在含油轴承材料的微孔中,从而减少油的泄露或挥发,提高其储油能力.因此,这种新型含浸凝胶的自润滑复合材料有望用于含油保持架/轴承.A new self-lubricating bearing material was prepared by pouring the self-constraint gel lubricant into the porous iron-based and poly-based porous bearing material.The supramolecular gelators described herein are completely dissolved in mineral oil or synthetic oil and self-assemble to form the stable gel.The gel has excellent thixotropic properties,unique physical and chemical properties and lubricating properties.So,the gel lubricant can replace the traditional lubricating oil or grease and be poured into a variety of porous iron-based and poly-based bearing materials by phase transformation of gel to obtain the self-lubricating bearing materials.These porous bearing materials impregnated with gel can greatly enhance their oil storage capacity by improving their viscosity of the base oil in a liquid state.The centrifugation experiments of the oil-impregnated and gel-impregnated bearing materials were accomplished with the speed test from 1000 to 7000 stepped by 1000 r/min intervals with 15 min test.The centrifuged mass loss of porous polyimide bearing materials impregnated with different lubricant at every speed increased in the order:500SN>2%A,PAO>3%B,Oil>2%C.Meanwhile,the similar results that the centrifuged mass loss of porous iron-based bearing materials impregnated with oil was far bigger than that of porous polyimide bearing materials impregnated with gel at every speed.The results showed that the new self-lubricating bearing material impregnated with gel can reduce the problems of oil rejection and leakage of oil-impregnated bearings under high-speed operation,and improved the oil storage performance of bearings.Moreover,these bearing materials had a better lubricating capacity than bearing materials impregnated with base oil.Taken PAO and 3%B as an example,the average friction coefficient of three kinds of porous poly-based bearing self-lubricating materials at 2,4,6 and 8 N decreased in the following sequence:oil-free>oil-impregnated>gel-impregnated,and the gel-impregnated porous poly-based bearing mat

关 键 词：凝胶润滑剂 自润滑 储油量 摩擦性能 多孔轴承 

分 类 号：TH117.3[机械工程—机械设计及理论]