基于X-CT的泡沫混凝土细观有限元模型及传热研究  

Study of mesoscopic finite element model and heat transfer behavior of foamed concrete based on X-CT

作　　者：党文婧 石友安[2] 刘铁 徐田圆 蒋俊 李睿智 金超 管小军 李军 卢忠远 张魁宝 DANG Wenjing;SHI Youan;LIU Tie;XU Tianyuan;JIANG Jun;LI Ruizhi;JIN Chao;GUAN Xiaojun;LI Jun;LU Zhongyuan;ZHANG Kuibao(State Key Laboratory of Environment-friendly Energy Materials,Southwest University of Science and Technology,Mianyang 621010,China;China Aerodynamics Research and Development Center,Mianyang 621000,China;Ningbo Construction Engineering Group Co.Ltd.,Ningbo 315040,China)

机构地区：[1]西南科技大学环境友好能源材料国家重点实验室,四川绵阳621010 [2]中国空气动力研究与发展中心,四川绵阳621000 [3]宁波建工工程集团有限公司,浙江宁波315040

出　　处：《新型建筑材料》2022年第9期6-11,共6页New Building Materials

基　　金：国家科技支撑计划项目(2011BAA04B04);西南科技大学博士基金项目(20zx7102);环境友好能源材料国家重点实验室开放基金项目(19kfhg16)。

摘　　要：以不同体积密度泡沫混凝土为研究对象,采用X射线断层扫描技术,三维重构得到泡沫混凝土的细观孔隙结构,结合有限元数值模拟,建立了泡沫混凝土的有限元网格化模型,通过数值模拟研究了其传热行为,预测其导热系数,并与传统模型进行了对比。结果表明:三维重构技术结合有限元数值模拟预测的导热系数与实测值高度一致,平均相对误差低至0.25%,较传统模型更精准。Based on the foam concrete with different densities,the mesoscopic pore structure of foamed concrete was obtained by X-ray tomography and three-dimensional reconstruction.Combined with finite element numerical simulation,a finite element mesh model of foamed concrete was established,the heat transfer behavior and thermal conductivity were predicted by numerical simulation technology,and compared with the traditional models.The results show that the predicted thermal conductivity values by 3D reconstruction technique combined with FEM numerical simulation are highly consistent with the measured values,and the average relative error is low to 0.25%,which is more accurate than the traditional models.

关 键 词：泡沫混凝土 X-CT扫描技术 有限元 三维重构 细观特征 

分 类 号：TU528.2[建筑科学—建筑技术科学]