考虑非均匀载荷分布的滚珠丝杠静接触刚度建模方法研究  

Research on modeling method of ball screw contact stiffness considering nonuniform load distribution

作　　者：陈勇将[1] 汤文成[2] 袁闯范 孙景凯 CHEN Yongjiang;TANG Wencheng;YUAN Chuangfan;SUN Jingkai(School of Aerospace and Mechanical Engineering,Changzhou Institute of Technology,Changzhou 213002,CHN;School of Mechanical Engineering,Southeast University,Nanjing 211189,CHN)

机构地区：[1]常州工学院航空与机械工程学院,江苏常州213032 [2]东南大学机械工程学院,江苏南京211189

出　　处：《制造技术与机床》2022年第10期71-79,共9页Manufacturing Technology & Machine Tool

基　　金：中国博士后科学基金面上项目资助(2019M651965)。

摘　　要：以双螺母垫片预紧式滚珠丝杠为研究对象,建立了可考虑非均匀载荷分布的双螺母垫片预紧式滚珠丝杠静接触刚度模型,并通过实验验证了模型的有效性。建立的模型可基于丝杠或螺母滚道为分析对象,着重分析了不同轴向载荷作用方向和大小对所有相位角处滚珠与滚道间接触角和法向接触力不均匀性的影响,以及接触角和法向接触力的分布不均匀性对轴向静接触刚度的影响,并获得以下结论:主要受接触角分布不均匀性的影响,以丝杠滚道为分析对象、轴向载荷负向时的轴向静接触刚度值较大;主要受法向接触力分布不均匀性的影响,随着轴向载荷的增大,不考虑载荷非均匀性模型获得的轴向静接触刚度值会逐渐偏离考虑载荷非均匀性模型获得的轴向静接触刚度值。Taking the double-nut washer pre-tightened ball screw as the research object,a static contact stiffness model of the double-nut washer pre-tightened ball screw that can consider the non-uniform load distribution is established,and the validity of the model is verified by experiments.The established model can be based on the screw or nut raceway as the analysis object,focusing on the impact of different axial load directions and magnitudes on the contact angle and normal contact force unevenness between the ball and the raceway at all phase angles,and the contact Influence of uneven distribution of angular and normal contact force on static stiffness of axial contact,and the following conclusions are obtained:mainly affected by the uneven distribution of the contact angle,the static stiffness of the axial contact when the screw raceway is used as the analysis object and the axial load is negative;it is mainly affected by the uneven distribution of the normal contact force As the axial load increases,the static axial contact stiffness value obtained without considering the load non-uniformity model will gradually deviate from the axial contact static stiffness value obtained by the load non-uniformity model.

关 键 词：非均匀载荷分布 滚珠丝杠静接触刚度 接触角 法向接触力 

分 类 号：TH113.1[机械工程—机械设计及理论]